Result: Brake Controller with Wiring

Wiring Adapter # 3016. For a trailer brake controller I recommend the Tekonsha Prodigy P3 # 90195 | Do you guys have a video for install of electric brake control for a 2020 Tahoe | At this...

on the brake output circuit if wired properly. The most obvious place to start would be by pulling each | My 5th wheeler is a 2006 Crossroads Cruiser SK30. Last week while on a trip, I made a sharp 90 turn...

the manual override lever of the controller several times and you'll feel the brakes start to grab harder | Is it necessary to manually adjust these brakes after installation? I purchased two sets from you...

and right hand brake assemblies. You'd want to use 10 gauge wire like part # 10-1-1 for wiring up | Hello I have a 2015 crossroads zinger 26dt trailer. From some online searching it looks...

I am wired for a 2nd AC unit and wanted to add a Furion 15500 AC. What are all the parts I need | I am wired for a 2nd AC unit and wanted to add a Furion 15500 AC. What are all the parts I need to do this? The unit should be...

be normal to change the brake assembly? | How can I make sure I’m ordering the right model? In your opinion, if the trailer is 2014 would be normal to change the brake assembly? | There's really no set hard and fast rule on...

or together auto mode. The motors run to a controller which is wired to the battery with a 50 amp circuit | Hello I was looking at the LC675817 6 point leveling system. I wanted to see if this would work...

see a wire harness that hangs down from the condenser and plugs into the controller. It will have | Looking for an advent AC unit to replace my Dometic unit. Prefer the start up capacitor. Do I need the entire...