Result: Brake Controller with Wiring

# ETBC7 to add the 7-Way and wiring to install a brake controller. I have included some links that show | Mike Here did great video on the C10 parts needed for wiring on a Chevy C10 1965. My...

and a brake controller 7-wire to use with our tandem axle trailer w/ brakes. Any help would be greatly | Hey guys, we just had a hitch installed on our van and now we are needing...

Im interested in the Tekonsha Prodigy P3 Trailer Brake Controller for use in two vehicles I have | Im interested in the Tekonsha Prodigy P3 Trailer Brake Controller for use in two vehicles I have. It will be...

Which is the ideal way to ground my new dexter electric brakes? A ground wire all the way | Which is the ideal way to ground my new dexter electric brakes? A ground wire all the way to the white wire on the...

Hi I have a 1965 mustang and i want to add a tow bar, the rear tail light, brake light and turn | Hi I have a 1965 mustang and i want to add a tow bar, the rear tail light, brake light and turn signal are all on the same line...

, and a storage bag. For trailer wiring you can use # 18252 which just hardwires into the tail light wiring | Will this part 13028 fit a short bed 65 Chevy c-10 pick-up. I notice that it only lists a long...

the brake signal. In Germany, trailers typically use a separate taillight wiring system where the brake | Good Morning, I have a 1965 F100 with the V8 352 engine and would like to put a hitch...

braking. For a tow bar I recommend the Alpha, # BX7380. It also comes with safety cables so you would | Does anyone make tow bar base plates to fit a 1965 mustang? | Neither Roadmaster nor Blue Ox have custom base plates for...

and trailer weight should I build the suspension, brakes, etc to haul without overloading the fundamental | I see in the QandA that Curt part 13028 fits a short bed 65 Chevy c-10 pick-up. My question is about the load range...