Recommended Parts to Flat Tow a 2021 Nissan Versa
If your 2021 Versa has a manual transmission you will need the parts listed below: Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM27FR Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 Supplemental Braking System - Demco SBS Stay-IN-Play DUO Supplemental Braking System item # SM99251 High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |
Parts Needed to Flat Tow 2017 Nissan Versa with Demco Tow Bar
This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV. The SMI Air Force One part # SM99243 will work well with this vehicle and your RV that has air brakes. |
Base Plate Kit Recommendation for Flat Towing 2017 Nissan Versa with Stowmaster Tow Bar
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry. | I have a 2017 Nissan Versa sedan. You show two...
Parts Needed to Flat Tow a 2011 Nissan Versa
For wiring you could go with something easy to install like the Peterson Magnetic Light Kit # PE26UR, which simply attach to your RV trailer wiring harness and stick onto the vehicle with magnets. | I have a 2011 nissan versa...
Which Base Plate Kit Fits 2017 Nissan Versa
Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry. | Hello. I purchased a used stowmaster by roadmaster....
Filter Your Search
Contact and Help