Result:

The two biggest things the nicer tow bars have that this one doesn't is telescoping arms that prevent binding and the ability for the tow bar to stow on your RV. Fixed arms will make it much more difficult to connect and disconnect because unless you are on perfectly level ground and are perfectly square behind the RV the bars are going to be very hard to line up upon connection, and they are going to be very hard to remove as they will want to bind up. |

The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. | I am interested in equipment needed...

The diode kit that comes with this allows you to splice into the taillight wiring so that your RV controls the vehicle taillights and does not require drilling into the taillight housings. | What options do you have to flat...

I am setting up a 2005 Honda Element Very good condition to flat tow behind my RV. I am looking at the Roadmaster Direct-connect Base Plate Kit Code1541-5. | I am setting up a 2005 Honda Element Very good condition to flat...

I have a 06 Honda Element and a Roadmaster 8000 tow bar. Is this bracket compatible with this set up? | Yes, the Eagle 8000 tow bar is compatible with the MX base plates # 1541-5 for your 2006 Honda Element. The tow bar arms will connect directly...

Base Plate Kit - Blue Ox Base Plate Kit item # BX2232 Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 Charge Line Kit - Roadmaster Battery Charge Line Kit for Towed Vehicles item # RM-156-25 High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. |