Trailer Hitch and Class II Drawbar for a 1995 Mercury Cougar Come with Hardware
The hitch you are looking at for your 1995 Mercury Cougar, the Class II Frame Trailer Hitch Receiver Hitch, item # 36179, includes all necessary installation hardware as shown in the instructions (see link). The Class II Drawbar 3-1/8 inch...
Will E-Z Flex Heavy Duty Rubber Suspension System Affect Ride Height
So I did all my measurements on my trailer to use these to replace current stock ones. One question I have does it lower or raise the height of the trailer at all? The reason I ask is because my stock measurements are 6 1/4 between mounting...
Trunk Bike Rack Recommendation for 1999 Mercury Cougar With a Spoiler
Will this product fit my 1999 mercury cougar? It has a spoiler. | My technical contact at Hollywood Racks confirmed that the Hollywood Racks Expedition 2 # HRF6-2 will fit your 1999 Mercury Cougar with your spoiler. I have attached a brief...
What is the Outside Diameter of the Hopkins Molded Trailer Wire Connector Part H20046
Can you tell me what outside diameter is of the black cable. I need to buy a rubber grommet to ensure the lack of wearing to cable. | I went to our warehouse to get the Hopkins trailer wire connector # H20046 to provide you the measurement you...
Can BOLT Spare Tire Lock Be Rekeyed After Synced With A Key?
Once keyed, can this lock be rekeyed? | No. Once keyed, the BOLT Spare Tire Lock - Codes to Jeep Key # BL5922986 cannot be rekeyed. It would require a new unit to fit a new key. This secures the lock by ensuring that the tumbler can only...
Availability of Trailer Hitch Receiver for 2024 Audi Q8 e-tron
I have a 2024 Audi Q8 e-tron and I'm looking for a hitch that fits. Not sure if there is one or not. Are you able to help me? | There is one hitch available that fits your 2024 Audi Q8 e-tron. That hitch is the Stealth Hitches Hidden Rack Receiver...
Winch Mount for Superwinch LT2000 Electric Winch and a 2007 Yamaha Rhino 450 4x4
Will this winch fit onto a 2007 Yamaha 450 Rhino? Do you sell the mounting plate? | Yes, you can use the Superwinch LT200 winch with your 2007 Yamaha Rhino 450 4x4. The custom mount you will need for your 2007 Yamaha 450 Rhino is the Bulldog...
Will the Hollywood Racks Express 3 # HRE3 Fit a Mercury Cougar with Factory Spoiler
Hollywood Express 3 Does NOT fit a Mercury Cougar with spoiler. No where to attach side straps, and the lower straps slip out of the shipping holes the manual refers to. The weight of the bike without driving made my spoiler loose. | You are...
Troubleshooting Tekonsha Prodigy RF Not Pairing To 2020 Audi Q8
Hello I am having trouble connecting my prodigy rf to my audi q8. The trailer directly connects to the car with no issue and lights all function, but I cannot pair the controller. I saw a post recently However, I am wondering that since the...
Trailer Hitch Extension for 2 Inch Hitch on 2019 Audi Q8
I have a new vehicle Audi Q8 with trailer ability factory installed. I tow a double jet ski and want to prevent the rear wheels from going in the salt water. I would use the device only on the ramp and not to tow on roads. I was hoping a 36...
Can I Use the Curt Echo Mobile Brake Controller in a 2019 Audi Q8
Will this fit an Audi Q8, getting conflicting reports. | All that is required to make the Curt Echo # C51180 compatible with a vehicle is a 7 way trailer connector with a dedicated 12v charge line. As long as your 2019 Audi Q8 has a 7 way where...
Will Wheel Chock # RA-17 Accommodate Motorcycle Tire 23 inches in Diameter
What tire sizes will this chock accommodate? What wheel chicks do you have that will accommodate a 23” diameter tire? | A 23 inch diameter motorcycle tire would not be an issue at all for the Rack'Em Manufacturing Removable Wheel Chock # RA-17...
Hi I have a new Audi Q8 with factory fitted cross bars. Im looking to mount a fishing kayak weighing circa 100lbs flat on top and need suitable cradle system. Please recommend. | To add a kayak carrier to your Audi Q8's factory crossbars you...
Aluminum Ball Mount and Cushioned Hitch Ball for Use with 2021 Kia Telluride
I have 2021 KIA Telluride I have purchased a receiver form you guys and I need to get ball mount and my measurements are 14.25 at the the receiver and the trailer level is 16.0 that being said puts me at 1.75 of rise so I round that up I guess...
Trailer Wiring And 7-Way Upgrade Kit For A 2019 Audi Q8
I have a Audi 2019 Q8. It has the hitch but not the wiring harness to power lights on the trailer. Do you have a wire harness I can use for this car? | For your 2019 Audi Q8, you can use the: -Tekonsha ZCI Circuit Protected Vehicle Wiring...
Recommended Catalytic Converter and Pipe for 1987 Mercury Cougar with 3.8L Engine
Hello i need the catalytic converter for a 1987 mercury cougar 3.8 engine and also the small pipe that connect to the catalytic. | For your 1987 Mercury Cougar, we have the MagnaFlow Stainless Steel Catalytic Converter - Direct-Fit # MF23366...
Hitch Confirmed to Fit a 2022 Audi Q8
Is there a hitch option for the 2022 Audi Q8? | There is. The Stealth Hitches Hidden Rack Receiver # 391AUDQ818 is confirmed to fit all models of the 2022 Audi Q8. This hitch is made in the USA, has a bolt-on, no-drill installation and will...
Will The Curt Adapter C35FR Work On A 2024 Audi Q8
Will this work properly on a 2024 Audi Q8 eTron with the factory towing package? I’d like to use it with a kayak trailer that has a 4 pin connector and LED lights. Thank you | Yes, the Curt adapter # C35FR is exactly what you will need to use...
Fit of Hollywood Racks Baja 3 Bike Rack # HRB3 on 1999 Mercury Cougar With Spoiler
My car is a hatchback with a spoiler with little to no bumper to speak of. II have a Townie i would like to transport as well as an option of also hauling one or two friends bikes one being a Schwhin Hybrid. I had a Saris Bones 3 for my Hyundai...
Filter Your Search
Contact and Help