Torque for 1/2 inch Diameter Wheel Stud Trailer Lug Nuts
lug nut torque 1/2 9200 pound camper,34 ft toy hauler. | 100 ft lbs would be good for the 1/2 inch diameter lug nuts on your trailer. |
Replacement Hub and Drum Assembly for Lippert 4,400 lb Axle
Need brake hub assembly attached pic with tag | The correct hub and drum assembly replacement for your Lippert 4,400 lb axle is the # 8-407-5UC3-EZ. This comes with bearings and a grease seal. If you need brakes as well you can use the # LC66WD,...
Availability of Trailer Hitch Receiver for 2024 Audi Q8 e-tron
I have a 2024 Audi Q8 e-tron and I'm looking for a hitch that fits. Not sure if there is one or not. Are you able to help me? | There is one hitch available that fits your 2024 Audi Q8 e-tron. That hitch is the Stealth Hitches Hidden Rack Receiver...
Troubleshooting Tekonsha Prodigy RF Not Pairing To 2020 Audi Q8
Hello I am having trouble connecting my prodigy rf to my audi q8. The trailer directly connects to the car with no issue and lights all function, but I cannot pair the controller. I saw a post recently However, I am wondering that since the...
Will Stromberg Carlson RV Exterior Ladder Fit a Toy Hauler
Would this work for a 2017 Coleman 250TQ Toy Hauler? Stromberg-Carlson LA-401 | The Stromberg Carlson RV Exterior Ladder w/ Hinges # LA-401 is a universal fit so it will work great on your 2017 Coleman 250TQ Toy Hauler as it can go on the side...
Trailer Hitch Extension for 2 Inch Hitch on 2019 Audi Q8
I have a new vehicle Audi Q8 with trailer ability factory installed. I tow a double jet ski and want to prevent the rear wheels from going in the salt water. I would use the device only on the ramp and not to tow on roads. I was hoping a 36...
Can I Use the Curt Echo Mobile Brake Controller in a 2019 Audi Q8
Will this fit an Audi Q8, getting conflicting reports. | All that is required to make the Curt Echo # C51180 compatible with a vehicle is a 7 way trailer connector with a dedicated 12v charge line. As long as your 2019 Audi Q8 has a 7 way where...
Hi I have a new Audi Q8 with factory fitted cross bars. Im looking to mount a fishing kayak weighing circa 100lbs flat on top and need suitable cradle system. Please recommend. | To add a kayak carrier to your Audi Q8's factory crossbars you...
Aluminum Ball Mount and Cushioned Hitch Ball for Use with 2021 Kia Telluride
I have 2021 KIA Telluride I have purchased a receiver form you guys and I need to get ball mount and my measurements are 14.25 at the the receiver and the trailer level is 16.0 that being said puts me at 1.75 of rise so I round that up I guess...
Trailer Wiring And 7-Way Upgrade Kit For A 2019 Audi Q8
I have a Audi 2019 Q8. It has the hitch but not the wiring harness to power lights on the trailer. Do you have a wire harness I can use for this car? | For your 2019 Audi Q8, you can use the: -Tekonsha ZCI Circuit Protected Vehicle Wiring...
Hitch Confirmed to Fit a 2022 Audi Q8
Is there a hitch option for the 2022 Audi Q8? | There is. The Stealth Hitches Hidden Rack Receiver # 391AUDQ818 is confirmed to fit all models of the 2022 Audi Q8. This hitch is made in the USA, has a bolt-on, no-drill installation and will...
Will The Curt Adapter C35FR Work On A 2024 Audi Q8
Will this work properly on a 2024 Audi Q8 eTron with the factory towing package? I’d like to use it with a kayak trailer that has a 4 pin connector and LED lights. Thank you | Yes, the Curt adapter # C35FR is exactly what you will need to use...
Wind Sensor For Solera Smart Arm 12V Power RV Awning
I have a 2017 Coleman Lantern 250TQ Toy hauler. I need to replace the entire awning, frame and all. I was looking at one that I can possibly auto retract with wind issues. I currently have a Lippert auto level TT system that I was hoping...
Filter Your Search
Contact and Help