Replacement Electric Motor For Landing Gear 1-065-041012-01
Hi, I currently have part # 1-065-041012-01 motors mounted horizontally on my jacks. Will LG-196308 or LC141893 be a better replacement? My motors are mounted horizontally as a reminder. I am not overly concerned about rpm’s and having a faster...
Is There An Issue With Seating Grease Seal Slightly Below Hub Face?
Hi. When installing the grease seal in an easy-lube hub/drum, what could be the consequences of pressing the hub seal below flush to its stop at the bottom of the seal bore versus pressing the seal flush with hub as specified? It appears the...
Adding Sidemarker Cameras to 2024 Coachman Adrenaline 27KB Prewired for Voyager 2.0
I am confused on other question and answer already posted. I think your telling me I cant use the Voyager 2.0 system IF I want a 4 camera system? bought a 2024 Coachman Adrenaline 27KB. Has prewiredinch Voyager 2.0 in the rear. But if I am...
Recommended Hardware for Dexter Equalizer for 2-1/2" Wide Slipper Springs # 13-141-3
What is the recommended hardware for this equalizer | To use with the Dexter Equalizer for 2-1/2" Wide Slipper Springs # 13-141-3 I recommend using the 1" diameter Suspension Bolt # 7-136-2-6-112 for the center/hanger bolt and the 3/4" diameter...
Ultra-Fab Deluxe Electric Landing Gear Set
2007 Coachmen Adrenaline 400DS Can these motors be positioned horizontally on the jacks? My current landing gear motors are horizontal on the jacks. | The Ultra-Fab Deluxe Electric Landing Gear Set, # UF17-943010 is not designed for an alternate...
Recommended Bearing Kit And Spindle Nut For 2008 Coachmen Adrenaline Blast W/ Lippert 3500lb Axle
Hi. I need a complete wheel bearing kit, including washer and spindle nut for a Lippert 3500 lb axle NV# 121021 Could you tell me which bearing kit i need? ...and the part number for the nut and washer? This axle is on a 2008 Coachmen Adrenaline...
Availability of 1-1/2" Waste Valve with 24" Extension Rod
What items do I need to purchase together for a 1.5” waste valve and a 24” extension rod? This is for my 2007 Coachman Adrenaline toy hauler | The Valterra Bladex 1-1/2" Diameter Waste Valve # T1001VP and the 24" Extension Tube # TX24HPB would...
Upgrading 6,000 lb Dexter Axles to 7,000 lb
Is this the only hub I can use if my Dexter Spindle Inner Dia = 3.376in and outer Dia = 2.25in.? I currently have 6000 # Dexter axles New RV w/ 3in. Dia Spindle, and want to make them 7000# axles that will accommodate Load G tires. | There...
Progressive Dynamics Pure Sine Wave Inverter w/ Transfer Switch
Thanks for the info and wiring diagram. The AC in and AC out both look like they need a 3 strand wire. what gage and or type of wire is recommended? Is it a push in connector on the PD 1600? Thanks | Per the Installation and Operation Guide...
How to Obtain Brake Light Signal in 2018 Mercedes-Benz Sprinter Chassis
2018 sprinter chassis. I found the green connector under the seat but it has no ground there. There is 4 wires and they all have the right signal. Except no brake signal . neither ground or power. The brake signal itself doesnt have ground either...
Filter Your Search
Contact and Help