Does Demco Hijacker Autoslide Fifth Wheel Hitch Require Grease Maintenance
Does the pin head need to be lobed anywhere like the mechanism where the pin slides in | I attached a picture that I took from the install instructions for the Demco Hijacker part # DM8550034 that you referenced that shows all of the components...
Will Dextar Conventional Steel Wheels Fit on a Vintage Truck
I know that these rims are for trailers, but will they work on a 1954 3100 Advance Design Pickup with a 6 on 5.5 bolt pattern? | The Dexstar 15" Conventional Steel Wheel, # AM20514, are basically the same wheels that were used on vintage 1940's...
Solution for Trailer Hitch Receiver on 1952 Chevrolet 3100
Do you sell a bolt on Class III hitch for a 1952 Chevy 3100 truck advance design? | I do have a solution, but there are no custom-fit bolt-on hitches for your 1952 Chevy 3100. What you can use is a universal hitch like the # 41990-07. This...
Hitch for 1952 Chevy 3100 Pickup Truck
MY 52 CHEVY PICKUP 3100 IS 46inch WIDE FRAME. DO YOU HAVE A HITCH TO FIT THAT? | The only hitch that would work for you is a weld-on such as the Curt # 15903. This is a universal hitch that is a Class V with a 2" receiver and works with frames...
Replacement Remote Control for Lippert TV Lift System
Our remote that lifts tv got broken. Can we buy a new remote | The Lippert Components TV Lift System with RF Remote # LC309690 will use the replacement remote and controller # LC253395. It is only available with the remote and the controller...
Could Curt Multi Fit Hitch C13702 Fit Truck Frame
C13702, can this be used on a truck? | Yes, the Curt multi-fit hitch part # C13702 that you referenced could be used on a truck. |
Overall Length of Bristol Double RV Waste Valves # 34466ND14AAR
Hello Could you please provide me with the outside to outside over all length, hub to hub. Thank You | The Bristol Double RV Waste Valves # 34466ND14AAR is about 9" long outside to outside. Attached is a photo showing this as well as a review...
What is the Width of the Curt Trailer Hitch Receiver part # 13430 is There a Universal Available?
What is the width of this hitch? | I went out to the warehouse and got the measurements for you on the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part # 13430 which has been made for the 1997-2006 Wranglers. To the inside of...
Will the Dexstar Conventional Steel Wheel Part # AM20766 Work with a Tire Tube
Will the Dexstar # AM20766 accept a tube required with the various tube type wide white wall bias ply tires? | I spoke with my contact at Dexstar and they informed me that you should have no trouble using the Dexstar Conventional Steel Wheel...
Is There a Dexstar Conventional Steel Wheel 16" 8 Lug Without Offset
Is this rim available without the + .5 offset? : Dexstar Conventional Steel Wheel w/ +0.5 Offset - 16 x 6 Rim - 8 on 6-1/2 - Black Item # AM20766 | The Dexstar Conventional Steel Wheel 16" 8 Lug part # AM20766 is only offered with an offset,...
Replacement Landing Gear Motor for a 2010 Dutchman Grand Junction
I have a 2010 Dutchman Grand Junction, weight 12,500lbs. I want to replace the motor in the pic with a comparable or stronger one. Thank you | To replace the landing gear motor on your 2010 Dutchman Grand Junction I recommend the Lippert Components...
1947-1953 Chevrolet Advance Design Pickup 3600 8 Lug Wheel
It is well known on many forums that you all have a Dexstar Black steel rims that is a perfect fit for 8 lug vintage pick ups. Any chance I could get a part number? | I believe the wheel that they are refering to is the Dexstar Conventional...
Filter Your Search
Contact and Help