Is There A Tire Pressure Monitoring System For Motorcycles?
Im am looking for the best tpms for my 2019 Harley Street Glide. Bluetooth to Android. Installs onto valve stem. Reliable! Whatcha got. | In my experience, all the TPMS sensors are just as reliable as the next. The Tire Linc TPMS for RVs and...
B and W Biker Bar Recommendation for 2007 Harley Davidson Softail
Could you shoot me an e-mail and let me know which biker bar is needed to fit a 2007 Harley soft tail custom? Thank you , | For your 2007 Harley Davidson Softail we have the B and W Biker Bar part # BWMC2302 which is a confirmed fit. It will...
15" Boat Trailer Wheel Recommendation to Fit with Disc Brakes
I have a caravan boat trailer single axle has 6 lug 15-in rims I foolishly bought tires and rims from Amazon and the rims do not fit on the Caravan trailer because of the hydraulic disc brakes and the rims rubbing on the calipers so I need two...
Trailer Wire Harness for 2006 Harley-Davidson FLHTi Electra Glide
Im having a hard time trying to find a plug and play harness for a 2006 electric glide standard with 5 wires out. At this time my Trailer has a flat 5 pin but I will eventual go to 5 pin round. The right harness is my big issue. Thanks | The...
B&W Biker Bar Motorcycle Tie-Down System For a 2008 Harley Davidson Electra Glide Classic
Which product will fit my 2008 Electraglide classic. Harley | The B&W Biker Bar Motorcycle Tie-Down System # BWMC2301 is designed for the touring line of Harley Davidson motorcycles. I do recommend verifying your frame has the frame tube diameter...
Trailer Tire Recommendation for Higher Speed in Size 5.30-12
I have a LUMINA pull behind MOTORCYCLE TRAILER that came with 5.30-12 tires that are only rated for 60mph. I saw two taskmaster tires that may be a fit. One of them was a smaller 4.30-12 that had a speed rating of 81mph that you recommended...
Converter for Wiring Motorcycle 5-Way to Trailer
Wiring my 89 electraglide to my piggyback trailer. Hi I bought your round 5 pin plug to fit my harley end,then cut off flat 5 from trailer. Can only get blinkers. Any ideas? | Since you have a motorcycle it almost certainly has separate tail...
Will B&W Biker Bar Motorcycle Tie-Down Systems Work if Both Bike Tires are Flat
Will it work when both motorcycle tires are flat? | The B&W Biker Bar Motorcycle Tie-Down Systems such as # BWMC2302 are designed at a specific height to attach to the frame of the bikes they were made for. Flat tires would make the bike lower...
What is the Weight Capacity of the CargoSmart Motorcycle Wheel Chock for E-Track Systems
What is the weight limit if this product and can I use the single slots e tracks in the floor 2 0f them or should i get about a 2 foot one. Going in a toy hauler with 3/4 flooring plus laninate flooring on the surface. I also have installed...
5-Way Flat Trailer Wiring Harness for a 1999 Harley Electra Glide
Hello, It appears you have a flat 4-pole trailer wiring harness for my 1999 Harley Electraglide, .... Hopkins Custom Fit Vehicle Wiring - 33525 Plug-N-Tow R Wiring Connectors provide a no-hassle, quick and easy way to wire your vehicle. but...
Parts Needed to Install 4-Way Trailer Wiring Harness on 2012 Harley Davidson Electra Glide
I have a 2012 Harley Davidson Electra Glide motorcycle. I am attempting to convert the current 5-wire set-up to a 4-wire system. Bike currently has separate Brake, Turn Signal, and Tail Lamp wires. I need to combine the Brake and Turn Signal...
Which B&W Biker Bar Fits a 2014 Harley Davidson Tri Glide Ultra Trike
Will this work for my 2014 Harley Davidson trike? And is this the right part #? | Yes. The B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson Touring # BWMC2301 will work on Harley Davidson trikes manufactured before 2014,...
Which B and W Biker Bar Fits Harley Davidson 2020 Heritage Classic 114
I am trying to find this info based on the sizing guide but I cant find the specifications for the bike on its size. I cant measure it either because this is a gift. As far as I know its a stock 2020 heritage classic 114. | We've checked with...
Will B&W Biker Bar from a 2010 Ultra Classic Fit a 2014 Softail Deluxe
I have a biker bar that was used for a 2010 ultra classic. I would like to use it on a 2014 softail deluxe. Will it fit? | The B&W Biker Bar that you should be using for your 2010 Ultra Classic is the part # BWMC2301 but for your 2014 Softail...
5-Pole Round Connector for Trailer to Match Connector on 1989 Electra Glide Harley Davidson
Trying to set up a small piggyback trailer. My female on bike is a 5 round pronge. And is a very small receptacle. Trailer is flat 5. Suggestions? | For the 5-Pole round connector on your 1989 Electra Glide Harley Davidson, like part # PK11502,...
Will B&W Biker Bar Motorcycle Tie-Down System Base # BWMC2300 Fit 2010 Harley Davidson Ultra Classic
Will the part number BWMC2300 fit on a 2010 Harley Davidson ultra classic limited motorcycle? | The B&W Biker Bar Motorcycle Tie-Down System Base with Anchor Plates # BWMC2300 will fit your 2010 Harley Davidson Ultra Classic. This will be just...
B&W Biker Bar Compatibility with Air Ride Suspension on 2002 Harley Davidson Road King FLHR
I have an 02 Harley Davidson Road King FLHR. Will aftermarket Air Ride Suspension for rear shocks affect the clamping of the Biker Bar MC2301 in any way?????? Any additional mounting instructions i.e. Completely air up/down the suspension...
B&W Biker Bar For A 1974 Harley Davidson Sportster
Frame for 1974 Sportster is 5-5/12 inches. The Biker Bar that I received would only close down to 8 inches. Already sent it back so the question is. Can I get a bar that closes down to 5 inches? | With the frame of your 1974 Harley Davidson...
Where Does White Wire On Curt 2 Wire to 3 Wire Converter C56196 Get Connected?
From the Khromewerks isolator module on my 2021 Harley TriGlide to the input side of the Curt 56196 converter box, I understand that the running light wire bypasses the converter box. But what about the white ground wire? Does it get cut and...
What is the Difference Between the B&W Biker Bars BWMC2301 and BWMC2303
what is the difference? I ordered the MC2301 and got 2303 | The B&W Biker Bar Motorcycle Tie-Down System for Trailers # BWMC2301 and # BWMC2303 will use the same base so will attach to the trailer the exact same way, but it is the actual bar...
Recommended 5th Wheel Hitch Compatible with Recessed Gooseneck on CM Brand Flat Bed Truck Body?
I already have the 21k Demco hijacker hitch. It is currently installed in my 2014 Ram 3500 with permanent rails. Im sure this part is compatible with my hitch but here is my question: I have just ordered a 2019 Ram 4500 with a CM brand, RD...
Correct B&W Biker Bar for a Harley Davidson Electra Glide Limited Low
Which model will work with my Limited Low. | I spoke to my contact at B&W and they informed me that the correct B&W Biker Bar Motorcycle Tie-Down System for your Harley Davidson Electra Glide Limited Low is the part # BWMC2301. I have attached...
Which B and W Biker Bar Fits 2013 Harley Davidson Ultra Classic
Hi can you please let me know which biker bar will fit my 2012 ultra classic | For a 2012 Harley Davidson Ultra Classic the correct Biker Bar is the # BWMC2301 that you referenced. |
Wheel Chock Recommendation for Harley Davidson Electra Glide on Trailer
lIhave a Harley Davison o 6 electra guild need to know what I can use to secure front tire in a motorcycle chock? | Since your Harley isn't one of the standard fits that they have a B and W Biker Bar designed for you would need to use the Custom...
Filter Your Search
Contact and Help