!Cherokee Alpha Wolf Travel Trailer  x   >   !Falcon  x   >   !airTight  x   >   Buffalo Tools  x   >  

Is the capacity of the jack safe for use with a chevy equinox 6 cylinder auto? | Yes, although your Chevy Equinox weighs more than 2,000 lbs (the capacity for the jack) the Buffalo Tools Electric Car Jack part # BTEJ212 that you referenced would...

this jack can be lift the Honda odyssey 2014 to change a tire? | The Buffalo Tools electric car jack # BTEJ212 is rated for 2,000 pounds. Since it is only lifting part of the vehicle and not the whole weight of the vehicle it can be used to...

Does this generator use a high or low pressure regulator | The Buffalo Tools Sportsman Series Generator # BTGEN4000LPC is designed for low pressure propane gas and comes with a low pressure regulator. |

I have a 5x10 trailer that I use to haul a 700lbs atv on. Which trailer dolly would you recommend to assist me in moving the trailer while the ATV is still on it? | The Buffalo Tools Trailer Dolly with 1-7/8" Ball part # BTTRDOLLY would be...

I want to use this to raise and lower a car using a 120ac/12dc convertor. How many amps does the converter need to be? | The Buffalo Tools Electric Car Jack, item # BTEJ212, is designed to run on the cigarette lighter circuit in the vehicle....

I am about to get a 2022 Silverado 3500hd dually and want to put airbags on it for towing my 5th wheel. I see #F2613 Would be the correct airbags to use for my truck. My question is about F2610. 1. Do I need a mounting kit for this that I need...

Hi there. I was just given a Firestone ride rite 2807 kit and would like to add an air tank to pump up tires. Do you know what all parts will be nessasary for the install? I know the tank bit is there a pressure switch or anything else needed?...

I need a unit that will fit under the bed cover on my pickup, when not in use. The information given is that Powerhouse 4000 watt is 16-1/2inch tall. Is this correct? The max. that will fit is 19inch in my truck bed, which rules out a lot of...

What is the size of this Mini Buffalo Tools MP2T come along, ie: 1/2, 3/4 as long or as big as a regular standard come along. Im looking for one that is about 1/2 the size as a reg one. Thanks | The Buffalo Tools Mini Power Puller # BTMP2T...

is there a propane sconversion kit for the Ai Power 2000 starting watts and 1600 running watts inverter generator | The A-iPower 2,000-Watt Portable Inverter Generator - 1,600 Running Watts - Gas - Manual Start # 289-SUA2000I is not compatible...

what is the size of this mini relative to normal come along? | The Buffalo Tools Mini Power Puller # BTMP2T referenced in your question is roughly 3/4 the size of a standard come along. This durable steel hoist includes 2 drop-forged hooks,...

where do I locate the mixer to clean it? | The mixer will be located near the air filter. It is very similar to a carburetor for a gasoline engine and can be cleaned by soaking in carb cleaner for a few hours and then blow it out with an air...

I am building a small camping trailer and have the intellisource 45 amp power center. I have it connected to about 12 12volt circuits. I also have 3 110 plugs that are wired to the unit. I have a 30 amp plug and wire going to the ac side...

How to start my 4000 sportsman generator | If this is the first time you are starting your 4000 Sportsman Generator part # BTGEN4000LPC you will first need to add oil to it, connect the gas source, choke the engine, ground the ground terminal,...

What is length of jack when at its lowest position? End of screw to end of gearbox housing. | I went out into our warehouse and measured the length of the Buffalo Tools Electric Car Jack part # BTEJ212 when it was in its lowest position and...

Do you have an electronic scissor jack that plugs into your dash? | We have the Buffalo Tools Electric Car Jack # BTEJ212 which plugs into the cigarette lighter port on the dash of your vehicle and allows you to use the included remote to raise...

Can the Powerhouse #69274 be converted to propane and if so where would one obtain the conversion kit? Also, would the efficiency of the inverter generator running with propane be comparable to it running with gasoline? | Powerhouse Professional...

What warranty comes with BTGEN7500DF and is there an extended warranty available? Thanks | It it's used in a household environment, the Buffalo Tools Sportsman Series Portable Generator, part # BTGEN7500DEF has a 1 year warranty. If the generator...

I have a lowered BMW. What is the total hieght of the jack when in the fully lowered posistion? | I spoke with my contact at Buffalo Tools and she said the overall retracted height of the Electric Car Jack, # BTEJ212, is 4-3/4 inches. It can...

For vehicles that have a pinch weld in the lifing areas is ths notch in the pad deep enough to allow for the pinch welds in these areas? No info provided on the depth of the notches. | On the Buffalo Tools Electric Car Jack # BTEJ212 the notch...

Is that the tongue weight | 600 lbs is the trailer weight capacity for the Buffalo Tools Trailer Dolly with 1-7/8" Ball # BTTRDOLLY that you referenced. For a similar dolly with a higher weight capacity we have the CE Smith dolly part # CE27550...

I have been looking at the two SUA 2000 inv./gen on your website and was wondering if you sell or recommend a propane conversion kit for this model. | A-iPower Inverter Generators w/ Parallel Kit # 289-SUA2000I-2 cannot be converted to run off...

I want to put possibly two of these units on my school bus. Is this a good option? What generator would I need for one of these or could I get one to run both at the same time. Bus is a 40 ft. 71 passenger. | Two of the Advent Air RV Air Conditioner...

I would like to purchase those 5inch replacement wheels for scaffolding. Do they come with pins or do you have to buy them and how much. Thanks | The Buffalo Tools Scaffold Replacement Swivel Caster # BTGSSI-C5 does not include the 1/2-inch...