Chrysler  x   >   Town  x   >   2010  x   >  

In your video its saying he can run the furnace and the appliances in the RV but what about running the ac unit because I see him using the adapter plug to plug in RV? | The A-iPower 5,000-Watt Portable Generator, Item # 289-AP5000, is designed...

Is it safe to use the TH911XT to carry 3 adult mountain bikes? | As long as your 3 mountain bikes remain under the 105 lb weight capacity of the Thule Passage 3 Bike Rack, # TH911XT, you will have no problem carrying them on your 2010 Chrysler...

What trailer hitch receiver will fit 2010 Chrysler town and country Stow N Go | There are no restrictions for Stow-N-Go seats for a trailer hitch for your 2010 Chrysler Town and Country so the trailer hitch I recommend for your van is the Curt...

can i use the Tow Ready Vehicle Wiring harness #119146 on my 2010 town and country, need a replacement for Curt powered converter have all wiring in place just need the converter dealer said curt unit was burned out only after a 1 1/2 years...

2010 Chrysler town and country pulling a coleman Utah pop up gvwr 3500. what weight distribution system should I use? | First it is important that you confirm your vehicle towing capacity. The LX version of the 2010 Town and Country has a tow...

will this rack fit my 2010 town and country? do I need a round electric connector? I have the flat 4 or 5 pin. also can I easily fit a townie go and Magnum metro with down tube batteries. Can I get a longer ramp that is not so steep. I am unable...

Do you carry a lift kit for a single tor-flex axle? i dont know how to identify what number axle i have on my 2003 Star-craft star shuttle, the trailer is rated for 3200 lb GTW. thanks | For your single torsion axle, I reached out to my contact...

I also need to install the adapter that will convert the 4 pin car plug to 7 pin flat RV plug. Is there a place to mount this on the Curt trailer hitch? | To convert your 4-Way trailer connector you will need the Brake Controller 7 & 4 Way...

Will this fit | We have a few transmission coolers that are designed to fit your 2010 Chrysler Town And Country. The Derale Transmission Cooler, part # D13502 is a plate-fin cooler that may be just what you are looking for. The biggest concern...

what size hitch will I need for 2010 town and country minivan | Your 2010 Chrysler Town and Country minivan can be equipped with either a 1-1/4-inch Class II or a 2-inch Class III trailer hitch. All options are shown on the link provided. I...

I have a weight distribution hitch and I need a longer shank to provide more drop. I would like to send a pick of my current shank to see what will work for a shank. | We have drop shanks for weight distribution systems like the # C17125 which...

Hello, so I am trying to decide between the curt or the draw tite 2” receiver hitch.. the draw tite says that no trimming of number facia is necessary. I’m assuming that’s the bottom bumper clip? That would be on limited models like mine? Wouldn’t...

I have a 2010 Chrysler Town and country what kind of other vehicles use the same kind of Hitch | The recommended Curt Class III for your 2010 Chrysler Town and Country is Curt Trailer Hitch Receiver # 13364. The hitch fits the Town and Country...

Will the timbren tdvrrt rear suspension work with Monroe 58648 load sensing shock absorbers? | I spoke with my contact at Timbren about the compatibility of the two systems, and he said that as long as the Timbren Rear Suspension Enhancement...

Many 3-bike racks that Ive seen so far wont fit our 2010 town and country. Will this model work on our van? | We have several trunk mount bike carriers that will fit your 2010 Chrysler Town and Country: Thule Passage 3, # TH911XT Thule Gateway,...

Does #13364 curt hitch fit 2010 town and country stow and go? | Yes, the Curt Trailer Hitch Receiver # 13364 will still fit a 2010 Chrysler Town and Country even if it has the Stow&Go seats. We actually had the chance to install this hitch...

I am looking for a wiring harness that has a 6-Pole Square Trailer Wiring Connector Kit Car and Trailer Ends - 37995 on one end and a 7-Way Molded Trailer Wire Connector, 8foot Long - H20046 on the other. Does this come as one piece? | To make...

Where to find replacement bolts for Minivan hitch 75579? Previous owner had hitch removed and installer kept bolts. | The replacement hardware kit for the Draw-Tite Max-Frame Trailer Hitch Receiver # 75579 is under part number Item # RHK. This...

Is the inlet and outlet diameter of 2.5 inches an inside diameter or an outside diameter? I have a 2.5 inch O.D. exhaust pipe I want to slide into the muffler. | The inlet/outlet/tubing diameters listed from Magnaflow are OD, outer diameter,...

Does my 2010 Chrysler , town and country have the wireing harness for the brake controller under the dash? | I have a solution for installing a brake controller in your 2010 Chrysler Town and Country, but there is no under the dash plug in adapter...

I have a 2010 town and country van i would like to purchase a roof bag that will mount to my existing roof rack | I recommend the RightLine Gear Sport 3 XL, part # RL100S30, for your Town and Country. The RightLine Sport roof bags are designed...

Whats the minimum distance from center of pin hole to the rear fascia of a 2010 Chrysler Town and Country? | The distance from the center of the hitch pin hole of etrailer.com Trailer Hitch Receiver # E98854 to the edge of the rear fascia (or...

I have a 2010 Chrysler Town and Country. Last year I put a towing package on, and added the factory 7 pin wire harness. I have an extra blue wire under the hood rolled up for the brake controller. What do I need to hook the brake controller...

Hi, I´m thinking of buying a trunk mount bike rack for my Chrysler Town and Country 2010. As we are a family of four we have two adult and two kids bikes. Unfortunately I could only find a rack for 3 bikes. As it should has a lock there are...