Bearing Kit that Works for 2007-2010 TADA Dutchmen for the Al-KO Axle
This is the bearing kit others have used for the 2007-2010 TADA Dutchmen for the Al-KO Axle. The specs are as follows: Trailer Bearing Kit Consists of: 1 - A17 Bearing Set L68149/L68111 1 - A4 Bearing Set L44649/L44610 1 - 442251 Seal 1 -...
Size of Bolt Used to Install Draw-Tite Trailer Hitch Receiver on a 1998 Lincoln Mark VIII
What size are the bolts that hold the hitch on,,, at the point where the exhaust re-attaches? The Curt hitch will not fit. It has 1/2 inch bolts at this point. The bracket is only 1/2” wide. I have had two here, had to send them back. Do...
Will Lippert 1621 5th Wheel Pin Box Fit a 2016 Crossroads Reserve 27BH
Will this kingpin fit a 2016 Crossroads Rezerve 27BH? | If your 2016 Crossroads Reserve 27BH has a 1621 pin box then yes, the Lippert 1621 5th Wheel Pin Box # LC1191191 will fit your application. If you have a different number (which can be...
Replacement Pin Box Options For A Reese Goose Box 94720
I bought my trailer and Camping World had already installed a Reese 20k Goosebox on ot. I would like to go back to my factory kingpin but I was not willing to pay them over $5,000 to undo what they just did. Is there a way to cross reference...
What is the Distance between the Pinhole and the Outside Wheel Hoop of the Traveler XC2 # S64663?
Trying to determine the distance between the hole on the hitch receiver to the farthest distance from same. | I confirmed with my tech at Swagman that the distance between the center of the pinhole to the outside edge of the furthest wheel hoop...
Filter Your Search
Contact and Help