Bearing Kit that Works for 2007-2010 TADA Dutchmen for the Al-KO Axle
This is the bearing kit others have used for the 2007-2010 TADA Dutchmen for the Al-KO Axle. The specs are as follows: Trailer Bearing Kit Consists of: 1 - A17 Bearing Set L68149/L68111 1 - A4 Bearing Set L44649/L44610 1 - 442251 Seal 1 -...
Size of Bolt Used to Install Draw-Tite Trailer Hitch Receiver on a 1998 Lincoln Mark VIII
What size are the bolts that hold the hitch on,,, at the point where the exhaust re-attaches? The Curt hitch will not fit. It has 1/2 inch bolts at this point. The bracket is only 1/2” wide. I have had two here, had to send them back. Do...
Air Conditioner Shroud For Coleman Mach Units
I need a replacement schroud for a Coleman 7330-713, any suggestions ? | The part number you listed is a Coleman Mach AC unit so that means that the replacement shroud part # MA00-325001 is the correct shroud replacement. |
How To Add a 7-Way to a 2008 Four Winds 5000 Motorhome
2008 Fourwinds 5000 E450 chassis has a 4 flat. I need a seven blade for my enclosed trailer. Is there a plug-in harness available? | I do have an option for you but there is not going to be an entirely plug and play 4 to 7-way adapter for your...
What is the Distance between the Pinhole and the Outside Wheel Hoop of the Traveler XC2 # S64663?
Trying to determine the distance between the hole on the hitch receiver to the farthest distance from same. | I confirmed with my tech at Swagman that the distance between the center of the pinhole to the outside edge of the furthest wheel hoop...
Filter Your Search
Contact and Help