Can the Prodigy RF Brake Controller be Adapted to Work with a 7-Way Round Pin Connector
Can this product be wired to a 7 round connector instead of 7 blade connector? | You would need an adapter to use the Prodigy RF brake controller # TK94FR with a 7-Way round pin connector such as # HM47425. The issue though is that if your...
Recommendation to Upgrade Older Fan-Tastic Fan 2000DMTS Vent
will this FV803358 replace the fan controls in Dutch star model # of the vent is 2000DMTS MADE IN 1998 | The Fan-Tastic Vent 3350 Series Upgrade Kit # FV803358 referenced in your question is designed to upgrade or replace parts of the Fan-Tastic...
Recommended Axle Upgrade for a 4,400 lb Lippert Axle
We want to upgrade our axles to supprt more weight. The one we have now is LCI52-SB-85-68.5-NOSP-OS-L-655-7278-30PT-3-GAWR 4400# Thanks | We do carry the Trailer Axle w/ Electric Brakes # e75SR which would be an upgrade to your 4,400 lb axles....
What Frame Dimensions Does Buyers Products Hitch Plate # 3371809061A Fit
Good Morning, I have a 63 Ford C850 that I need a heavy hitch for. After a bit of digging I found that this hitch is supposed to fit a 34inch medium duty truck frame. My question is where to measure that 34inch at. Outside of the frame?...
Power Panel to Replace Older Progressive Dynamics Panel in 1988 Ford Tioga
My power box on my 1988 Ford Tioga Fleetwood went out and we now have no power. I need to replace it but not sure what will replace the old one since it is no longer made | Looks like you have an older Progressive Dynamics panel like the part...
Can the Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs Be Cut/Trimmed
do you make a 24 3/4inch slide out rail kit? | The Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs part # LC84FR are cut to fit per Lippert. |
Cant Find Cold Side of Brake Light Switch on 2007 Freightliner Century Semi for Brake Controller
Looking for the break switch and the cold wire on a 2007 freightliner century semi | I do have a possible brake controller that you can use but unfortuantely I can't really help you out with locating your stop light switch on a 2007 Freightliner...
Float Vs. Fixed for Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs
Which is right? • Expert Reply: The Replacement Standard Dual Rack Repair Kit for Lippert RV In-Wall Slide-Outs - Fixed Side, # LC84FR is the right side of the slide-out as looking at it, facing it, from the outside. The float side, # LC26VR,...
Are There Replacement 46" Long Leaf Springs for Military Trailers
Hello I have an Army trailer and I looking for Leaf Spring 46 Long by 2 3,500 each need two please let me know if there anyway you can help out with it thank you | I do have an option for you but we unfortunately do not offer any leaf springs...
Which Drop Brackets for Draw Tite Hitch 41990 for Freightliner Step Van
Which bracket kit should I get to put a drawtite hitch on my 1999 Freightliner step-van with Utilimaster body? I think it is the M45. Would the 7 inch brackets work? The 16 is also listed but much more expensive. I plan to tow a car and eventually...
Troubleshooting The New-Style Linc Analog Remote That Won't Pair To Transmitter
We cannot pair our new remote with our 2013 RV as we never hear the « audible click » of the receiver to begin with. Are there other instruction possibilities or workaoround to these very unclear instructions? | If you've already tried to...
Will Adco Tyre Gard RV Wheel Cover # 290-3933 Fit Wheels 5-1/2 Feet Wide?
I have a Travel Trailer and the wheel with is about 5 1/2 feet wide will this cover my two wheels I have a 2015 Crossroads Sunset Trail 32RE . wheel cover 290-3933 | The dimensions of the Adco Tyre Gard RV Wheel Cover - Double Axle - 27" to...
What Bearings Do I Need for a Lippert 4,400 Lbs Trailer Axle?
2016 Crossroads Sunset Trail 32RL, Lippert 4400# axles. Your site seems to be jumping between the LM67048 and the L44649 bearing. Confused as to which one I actually need. Thanks | Lippert is a little funny when it comes to their 4,400 lbs axles....
Is the Garnish for Fan-Tastic Vents Roof Vent FVK2040-80 Square and Can it Be Trimmed
Need to know if product FVK2040-80, off white is actually square? Mine is an old model Im replacing and must be square to fit vent . Cant use rounded corners. Do you have one with only a 2 or 3 inch frame/ down. ? Please let me know before...
Filter Your Search
Contact and Help