Trailer Hitch Receiver and Wiring Harness For a 2000 Honda S2000
Hi, Im interested in the S2000 hitch C11198 but it says that it only fits 2004 - 2009 S2000s. Do you guys have one that will fit a MY 2000 S2000? Thanks | The Curt Weld-On 2" Receiver # E17 will allow you to have a receiver custom fabricated...
Trailer Hitch and Wiring for a 2000 Honda S2000
Do you have an installation manual for the hitch its a 2000 honda s2000 | Yes, installation instructions for Curt trailer hitch # C11212 (no longer available) are linked on its product page, right hand side of the page. I have also included...
Will Dextar Conventional Steel Wheels Fit on a Vintage Truck
I know that these rims are for trailers, but will they work on a 1954 3100 Advance Design Pickup with a 6 on 5.5 bolt pattern? | The Dexstar 15" Conventional Steel Wheel, # AM20514, are basically the same wheels that were used on vintage 1940's...
What is the Width of the Curt Trailer Hitch Receiver part # 13430 is There a Universal Available?
What is the width of this hitch? | I went out to the warehouse and got the measurements for you on the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part # 13430 which has been made for the 1997-2006 Wranglers. To the inside of...
Will the Dexstar Conventional Steel Wheel Part # AM20766 Work with a Tire Tube
Will the Dexstar # AM20766 accept a tube required with the various tube type wide white wall bias ply tires? | I spoke with my contact at Dexstar and they informed me that you should have no trouble using the Dexstar Conventional Steel Wheel...
Is There a Dexstar Conventional Steel Wheel 16" 8 Lug Without Offset
Is this rim available without the + .5 offset? : Dexstar Conventional Steel Wheel w/ +0.5 Offset - 16 x 6 Rim - 8 on 6-1/2 - Black Item # AM20766 | The Dexstar Conventional Steel Wheel 16" 8 Lug part # AM20766 is only offered with an offset,...
Overall Length of Bristol Double RV Waste Valves # 34466ND14AAR
Hello Could you please provide me with the outside to outside over all length, hub to hub. Thank You | The Bristol Double RV Waste Valves # 34466ND14AAR is about 9" long outside to outside. Attached is a photo showing this as well as a review...
Recommended Trunk Mount Bike Rack and Security Options for a 2005 Honda S2000
my vehicle is a 2005 Honda S2000 i would like to get a bike rack one is o.k., 2 bikes more realistic if there is one with a security feature, so much the better. what is the best way for me to go this is my baby car,so nothing that will...
Hitch for 1952 Chevy 3100 Pickup Truck
MY 52 CHEVY PICKUP 3100 IS 46inch WIDE FRAME. DO YOU HAVE A HITCH TO FIT THAT? | The only hitch that would work for you is a weld-on such as the Curt # 15903. This is a universal hitch that is a Class V with a 2" receiver and works with frames...
Does Demco Hijacker Autoslide Fifth Wheel Hitch Require Grease Maintenance
Does the pin head need to be lobed anywhere like the mechanism where the pin slides in | I attached a picture that I took from the install instructions for the Demco Hijacker part # DM8550034 that you referenced that shows all of the components...
Recommended Trailer Hitch and Bike Rack for a 2004 Honda S2000 Convertible
Hi, Im interested in getting a trailer hitch and 2-mtnbike rack for my 2004 honda s2000. would you recommend the curt hitch and which model? similarly, which of the bike racks do you recommend? the swagman platform racks look interesting, which...
1947-1953 Chevrolet Advance Design Pickup 3600 8 Lug Wheel
It is well known on many forums that you all have a Dexstar Black steel rims that is a perfect fit for 8 lug vintage pick ups. Any chance I could get a part number? | I believe the wheel that they are refering to is the Dexstar Conventional...
Where Does a Trailer Hitch Install on a 2003 Honda S2000
I am hoping to verify that this hitch is mounted to the frame. | The Curt trailer hitch # C11212 attaches to the frame of the 2003 Honda S2000 in 2 places and to the trunk pan in 4 places. I have linked the installation instructions that show...
Could Curt Multi Fit Hitch C13702 Fit Truck Frame
C13702, can this be used on a truck? | Yes, the Curt multi-fit hitch part # C13702 that you referenced could be used on a truck. |
Solution for Trailer Hitch Receiver on 1952 Chevrolet 3100
Do you sell a bolt on Class III hitch for a 1952 Chevy 3100 truck advance design? | I do have a solution, but there are no custom-fit bolt-on hitches for your 1952 Chevy 3100. What you can use is a universal hitch like the # 41990-07. This...
Recommended Trailer Hitch for a 2001 Honda S2000 to Tow a Motorcycle or Jetski
I am looking for a trailer hitch for a 2001 Honda s2000 to tow a motorcycle or jetski on trailer. What do you recommend for this vehicle that is easy to install prefer no drilling or welding and that is the most hidden, so as to not ruin the...
Filter Your Search
Contact and Help