5th Wheel Tailgate Fit For 2012 Chevy Silverado 3500
Which steel locking tail gate will fit my 2012 Chevy 3500hd dually. | So there are actually two 5th wheel tailgates that fits your 2012 Chevy Silverado 3500 - one is a locking tailgate that is made with a composite (which is a type of very hard...
Weight of Stromberg-Carlson RV Bunk Ladder and its Weight Capacity
I dont see weight listed for this 66inch bunk ladder. Please provide. Thanks! | The shipping weight of the Stromberg-Carlson RV bunk ladder, # LA-466B, is 6.88 pounds so the ladder itself weighs approximately 5 pounds. The weight capacity is...
Are Stromberg Scissor Jacks # JSC-24 Higher Quality
Okay, “we” all shop the same way. Harbor Freight and Amazon have made in China 4 units at $180. or less. Yours are 2 units at $150 so quite a price difference. Is there a quality difference? Yes I ordered yours yesterday. | The Stromberg scissor...
Which Gear Box Replacement for Venture 940RB-341955 Landing Gear Motor
Replacement landing gear box on a 2008 Keystone ChallengerVMC940RB-341955 | For your 2008 Keystone Challenger with the Venture 940RB landing gear motor you can replace the gear box with either # LC276602 or # LG-179015. Either one will work...
What Is This Part W/ Two Threaded Studs In My Stromberg Carlson Electric Trailer Jack JET-3755?
It is a small box with 2 threaded posts for power wire and then into motor? | I reached out to my contact at Stromberg Carlson and the part shown in your picture is a circuit breaker. They do not currently offer a specific replacement circuit...
Landing Gear Will Only Retract & Not Extend
I have a 2015 grand design the front landing gear only works in the retract mode . Tried new switch no luck only works in the the lowering of the unit. Thanks | If your landing gear only retracts and doesn't extend, the first thing I always...
Replacement Motor and Gear Box for Landing Gear # ADTH 1RV-200 on Keystone Everest
Need replacement motor and landing gear/gear box for 2005 Keystone Everest Motor is ADTH 1RV-200. My husband would like for the motor to be 8000 | To replace the ADTH 1RV-200 motor on your landing gear the Stromberg Carlson # LG-196308 will...
Can Foot Plate of Stromberg Carlson Electric Jack be Left On When Traveling
I have an electric trailer jack and wonder if the foot should be removed when traveling or can it be left in place? Thanks for any help. | The foot of the # JET-5000 that you referenced can be left on as long as you have enough ground clearance...
Trailer Hitch for Bike Rack on 5th Wheel Trailer
Do you have a class 3 trailer hitch that I can install on a 2013 open range 5th wheel. I will be using it to carry two bicycles. | To know for sure which hitch fits you'll have to measure the frame of your trailer. It's mostly going to be...
Powered A-Frame Jack Recommendation for R-Pod Trailer for Installing Weight Distribution
I would like to replace the trailer tongue jack on my R-pod with an electric tongue jack. I have a Ram 1500 truck and the rpod weighs less than 3500 lbs with a tongue weight of probably 10 of that. I need to raise the tongue plus the end of...
How Many Bikes are Typically Carried on the Bike Bunk part # CC-275
I am looking for a good way to haul my bikes with my travel trailer. I noticed you sell a front trailer bike rack and I am wondering if it will fit my 2016 keystone sprinter 316BIK? Also is it in a 2 bike setup or is there one that does 4 bikes? Thanks...
Aluminum Gearbox Replacement Recommendation for Atwood Landing Gear
will your aluminum fifth wheel gearbox be a direct replacement for the Atwood gearbox? Thanks | The replacement gearbox, part # LG-179015 has been used by several customers and they say it is a great fit for Atwood landing gear. This gearbox...
Replacement Gear Box Recommendation for Trailer with Venture Landing Gear
I have a 2005 raptor 3612 toy hauler. Like many others a tab broke off my venture gearbox for my landing gear. Is the LG-179015 for stromburg or the Lippert 276602 the correct gear box replacement. I can not find any other markings on the gearbox...
Do Cross Braces on Stromberg-Carlson Porch Trailer Step # EHS-103-R Need to be Attached Each Time
do you have to put this together every time you use it? | Yes, my contact at Stromberg-Carlson confirmed that the 8 cross braces on their Porch Trailer Step # EHS-103-R need to be screwed into place each time the step is used. This unit comes...
Replacement Landing Gear Drive Leg for a 5th Wheel Trailer
i NEED TO KNOW IF THE MODEL YOU ILLUSTRATE WILL FIT MY 1999/2000 SUNNYBROOK 5TH WHEEL. IT appears that it would. Do I need definite measurements or model. I do not know the brand of landing gear I have and I do not believe it is welded....
Recommended Exterior Ladder for a 2016 Dutchmen Denali Travel Trailer
What ladder would I buy for my 2016 Denali Travel trailer? Thank you in advance | For your 2016 Dutchmen Denali Travel Trailer I recommend using the Stromberg Carlson RV Exterior Ladder part # LA-401BA. This ladder like all of our options is...
Will A 3/4 Inch Socket Fit To Raise And Lower Stromberg Carlson Leveling Scissor Jack
Does the jacking mechanism use a 3/4 socket to raise and lower the jack? Do you supply a bracket that can be mounted next to the jack stand to protect the jack from being broken? If it exists, what part number should I use. | I walked out...
Will the Stromberg Carlson # LG-179014 Replace a Venture # 90040L Jack Follower Leg
Will this replace a Venture follow leg #900-40L ? | According to my contact at Stromberg Carlson, their # LG-179014 follower leg would indeed be an acceptable replacement for your Venture # 900-40L if the 29-1/2 inch outer tube and overall heights...
Replacement Switch for Stromberg Carlson Landing Gear System on Trailer
I need th landing gear switch with casing. My motor runs great but the switch broke out. Do I have to replace everything or can I just get bathe swithch and cashing seperate. | We do have a nice selection of replacement switches available for...
Ability to Adjust or Calibrate Bubble Level on Stromberg Carlson Electric Trailer Jack # JET-3755
Is there any way to calibrate the bubble level on this jack. I know, from the use of three other levels, that my travel trailer is level but this level shows quite a bit out of level. | I spoke with my contact at Stromberg Carlson regarding...
Height of Base Unit of Lippert LC429756 Jack-It Trailer Tongue Mounted Bike Rack
Jack-It 2 Bike Rack for A-Frame Trailers - 22-1/2 Jack Clearance Question: I know the height from the tongue to the bottom of the receiver for the shank arm is 22 1/2, but what is the height of the top of that receiver where it protrudes above...
Parts Included with the Stromberg Carlson Replacement Aluminum Ladder Rung # 8538-T
Hi, Does the black end caps come with the replacement rung? | The Stromberg Carlson Replacement Aluminum Ladder Rung, # 8538-T, is a replacement rung for Stromberg Carlson RV Ladders. This replacement rung includes the black end caps and 2...
What Version of 2009 Dodge Ram are Fifth Wheel Tailgates Available for
I have a 2009 Dodge 1500 crew cab. I need to confirm that the VGD-02-100 will fit. I have seen it advertised as fitting my vehicle and also seen it saying only 2500+ | It does not fit a 1500 and at this time the only options for fifth wheel...
Replacement Foam for Lend-a-Hand Folding RV Handrail
I've used one of these before and the foam eventually wore off. so I anticipate that happening with this as well. Are there any replacements I can get just to have as a backup for this? | Yes, to replace the foam on the Lend-a-Hand Folding RV...
Filter Your Search
Contact and Help