!300M  x   >   !IS 200t  x   >   Harley Davidson  x   >  

I have a LUMINA pull behind MOTORCYCLE TRAILER that came with 5.30-12 tires that are only rated for 60mph. I saw two taskmaster tires that may be a fit. One of them was a smaller 4.30-12 that had a speed rating of 81mph that you recommended...

I have a 2012 Harley Davidson Electra Glide motorcycle. I am attempting to convert the current 5-wire set-up to a 4-wire system. Bike currently has separate Brake, Turn Signal, and Tail Lamp wires. I need to combine the Brake and Turn Signal...

Have a 1999 Harley-Davidson FLSTC and need to know what B&W Biker Bar setup I should buy Thanks | The correct B&W Biker Bar for your 1999 Harley-Davidson FLSTC Softail is the following: - B&W Biker Bar Motorcycle Tie-Down System for Trailers...

From the Khromewerks isolator module on my 2021 Harley TriGlide to the input side of the Curt 56196 converter box, I understand that the running light wire bypasses the converter box. But what about the white ground wire? Does it get cut and...

Can a person order extra base plates for use on multiple trailers? | Just the base of the B and W Biker Bar part # BWMC2301 that you referenced is available as a separate item with the part # BWMC2300. |

Will the Rockford fosgate hide away receiver work with a 2008 harley flhtcu Electra glide classic? | Yes, although is may not be as compact as you prefer for a bike, even a touring frame such as the FLHTC. You need the Remote for Rockford Fosgate...

I have a caravan boat trailer single axle has 6 lug 15-in rims I foolishly bought tires and rims from Amazon and the rims do not fit on the Caravan trailer because of the hydraulic disc brakes and the rims rubbing on the calipers so I need two...

What model of the BandW Biker Bar will fit my 2003 HD Heritage Springer? Thanks. | The 2003 Harley Heritage Springer would fall into the Softail, Dyna, and V-Rod category as far as the Bike Bars go so you would need model # BWMC2302. Specs...

Wiring my 89 electraglide to my piggyback trailer. Hi I bought your round 5 pin plug to fit my harley end,then cut off flat 5 from trailer. Can only get blinkers. Any ideas? | Since you have a motorcycle it almost certainly has separate tail...

I am trying to find this info based on the sizing guide but I cant find the specifications for the bike on its size. I cant measure it either because this is a gift. As far as I know its a stock 2020 heritage classic 114. | We've checked with...

Im am looking for the best tpms for my 2019 Harley Street Glide. Bluetooth to Android. Installs onto valve stem. Reliable! Whatcha got. | In my experience, all the TPMS sensors are just as reliable as the next. The Tire Linc TPMS for RVs and...

Does the 215/60-8 come in a radial? If not , what is the smallest radial | We do have several 215/60-8 tires like the # AM3H323 but nothing in a radial. The smallest radial tire that we stock is a 145/80-12 in part # AM31202. This would be a...

I have touring base and bar in my trailer. Can I buy just the bar that will fit 1998 fat boy? | The B&W Biker Bar Motorcycle Tie-Down System for Touring Harleys, part # BWMC2301, will not fit a Fat Boy frame but all you need is part # BWMC2302B...

Does the converter draw any amperage when no trailer is connected? I am considering adding a relay to power this to ignition because Im concerned about parasitic draw on battery . | No, the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole...

Will the part number BWMC2300 fit on a 2010 Harley Davidson ultra classic limited motorcycle? | The B&W Biker Bar Motorcycle Tie-Down System Base with Anchor Plates # BWMC2300 will fit your 2010 Harley Davidson Ultra Classic. This will be just...

Good Morning all, any clearance issues or problems reported with bwmc2302? The reason for the question is the brake lines run along the top right of the frame on my 2006 Softail Deluxe Harley. I wasnt sure if the bar cradle ends that wrap around...

Will this work for my 2014 Harley Davidson trike? And is this the right part #? | Yes. The B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson Touring # BWMC2301 will work on Harley Davidson trikes manufactured before 2014,...

Hi will 329 GBC007 Work with harley davidson hog booster to jump start harley fatboy 2017..? Thank you.. | There are a number of different boost jump starters that the Eyelet Cable with X-Connect Adapter for NOCO Boost Jump Starters #...

Will it work when both motorcycle tires are flat? | The B&W Biker Bar Motorcycle Tie-Down Systems such as # BWMC2302 are designed at a specific height to attach to the frame of the bikes they were made for. Flat tires would make the bike lower...

I already have the 21k Demco hijacker hitch. It is currently installed in my 2014 Ram 3500 with permanent rails. Im sure this part is compatible with my hitch but here is my question: I have just ordered a 2019 Ram 4500 with a CM brand, RD...

Hello, It appears you have a flat 4-pole trailer wiring harness for my 1999 Harley Electraglide, .... Hopkins Custom Fit Vehicle Wiring - 33525 Plug-N-Tow R Wiring Connectors provide a no-hassle, quick and easy way to wire your vehicle. but...

Which model will work with my Limited Low. | I spoke to my contact at B&W and they informed me that the correct B&W Biker Bar Motorcycle Tie-Down System for your Harley Davidson Electra Glide Limited Low is the part # BWMC2301. I have attached...

Hi can you please let me know which biker bar will fit my 2012 ultra classic | For a 2012 Harley Davidson Ultra Classic the correct Biker Bar is the # BWMC2301 that you referenced. |

Vehicle is 2020 harley davidson TriGlide. Need Trailer Hitch, brake controller and wiring harness. Do you have any of these items available | While we do not have a trailer hitch for your 2020 Harley Davidson TriGlide I can help you with all...