What our customers are saying:
Thank you! I enjoyed shopping your site.
Jamie
Mechanicsville, VA
Videos
for RV Power Inlets
Help Articles
Expert Answers
Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power…
The plastic that comes on the 50A SmartPlug RV Power Inlet and Connector #SM76FR is very durable and you'll be happy with…
Yes, for the white version of the MaxxFan Deluxe Roof Vent with 12 volt fan, thermostat, remote and powered lift we have the part #MA00-07000K which is exactly what you need.
In order to wire your cargo trailer for both 12 volt DC and 110 volt AC power you would need to install a AC/DC distribution panel and power converter which we currently do not offer. You would then wire the 12 volt power to the converter along…
Based on the available information for your 2022 Airstream Flying Cloud 30FB it looks like you have Dexter #11 Torflex axles. Assuming that is accurate, you need the Torflex Lift Kit - Tandem Axle -…
The picture you sent in is the SmartPlug RV TV/Internet Inlet #SM98FR we just have it as a different part number. Based how this is designed it would take quite a bit of rain or moisture to get into the recessed connectors of this.…
Aside from the six 15A or GFCI power receptacles (5 interior and 1 exterior) and the breakers/fuses, we have all the parts you need to complete your project. For the power inlet on the outside of your horse trailer you can use the Epicord 30 Amp…
We have the Multi-Purpose Access Door for RVs, #37231025. This is a 6-3/4" diameter hatch that requires a…
No, the Correct Track Trailer Alignment and Lift Kit #RR55QX that you referenced are not the Never Fail bushings. The picture is correct and the kit has 16 brackets and 16 correction plates.
Yes, 10 AWG wire will fit in the Mighty Cord Replacement Twist Lock Connector for RVs #A10-30FDT.
The USB Outlet with Waterproof Cap #DG61USBVP requires a 1-1/8" depth without the cap. The cap for the face has a ring that…
The Yakima Replacement Anchor Plate Style-A, Part #Y8810074, comes as a set of 8 plates that measure 3/4-inch x 7/8-inch. The centered threaded hole measures 0.2 inches (or 5.1 millimeters) in diameter. Please refer to the photo provided. The…