Can Built-In Camber be Adjusted on Timbren Axle-Less Trailer Suspension System with Hubs
Question:
Can the caster be adjusted for toe-in etc as they wear?
asked by: Chris
Expert Reply:
When installing the Timbren Axle-Less Trailer Suspension System with Hubs # A12WS545 referenced in your question, the toe-in will need to be set. However, the system does include shims that will allow you to adjust the camber as needed. I have attached an installation video on this product for you to check out. Right around the 4 minute mark you can see this feature explained.
This is a great axle-less suspension system with a weight capacity of 1,200 pounds and a bolt pattern of 5 on 4-1/2 inches. The hubs will include the # L44610 inner and outer bearings, as well as the races and seals.
Products Referenced in This Question
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Complete Breakdown of the Timbren Axle-Less Trailer Suspension w/ Idler Hubs
- Shop: Dutton-Lainson Boat Trailer Jack w Footplate - Sidewind - Swivel - 12" Lift - Black - 2,000 lbs