Trailer Hitch Compatible with 1990 Ford E350 Van

Updated 06/26/2025 | Published 08/13/2014

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(20)

$211.73

Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"

(41)

$424.15

Question:

Hello, I have a 1990 Ford E350 full size van and when I looked up the hitch by Ford Van it says that the hitch doesnt fit E350 vans. Do you have a different hitch that fits my van or do you know where I can get one? Thanks in advance for any help you can give in helping us find a hitch for our van. Sincerely

asked by: Craig R

Expert Reply:

According to my Curt Representative, the Class IV # 14053 or the # 13053 Class III hitch is a fit for the 1990 Ford E350 Van. The Class IV hitch has a 1000 lb tongue weight 10,000 lb towing capacity. The # 13053 Class III has a 500 lb tongue weight, 5,000 lb towing capacity.

You can purchase either hitch by clicking on the provided product links.

expert reply by: Mike L

Ken V.

5/25/2020

but there are no holes in bottom of frame at rear on my 90 E350 it is a RV chassis.. is that different ?

Chris R.

5/28/2020

Both of the above Curt hitches (part # 14053 or # 13053) do require drilling a couple holes into the frame rails for attachment, but there should also be two existing holes on each side that are used. The chassis really shouldn't be different in this regard just because it's used for an RV. With that being said, if you can't see anything on the frame rails then they'll all just need to be drilled for proper attachment.

Charles L.

6/24/2025

Sorry , I meant to say 1997 e350 not 1990. Can you update me on this one. Same measurements. 42” overall outside to outside frame. Approx 39” center to center. Class 4 . Thank you