Does the EcoHitch Front Mount Trailer Hitch # EH87SR Fit a 2026 F150 w/Active Air Dams?
Published 11/20/2026 >
Products Featured in This Question
Question:
Does this hitch work wtih for F-150 XLT with active air dam. I use if for a snowsport snow plow, they dont have a reciever htich for it due to the air dam. I eed to make sure that is not a problem with this htich. I also need to know if the hitch would be soemwhere between 8 and 18 inched from the ground for the plow to work properly. thanks
asked by: John M
Expert Reply:
Hi John,
The EcoHitch Hidden Front Mount Trailer Hitch Receiver part # EH87SR won't work with your 2026 Ford F-150 because of the active air dams. The lower blade and motorized actuators in the front lower area are in the same spot that the hitch mounts so there's no space for the hitch to install without it making contact with the air dam system. The air dam assembly and lower blade would need to be removed in order for the hitch to fit. Tork Lift's instructions for installing this hitch explain how to remove the air dam and lower blade if you do decide to go that route.
I'm not sure if your truck is still stock height, but on a 2026 Ford F-150 XLT the receiver would sit around 8" to 9.8" off the ground, right in line with the lower front air dam. The height varies depending on if you have a 4x2 or 4x4 cab. So, if you did decide to remove the air dam and lower blade, you'd have just enough clearance for your snowplow.
What snowplow are you planning on using with it?
Product Page this Question was Asked From
EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Front Receiver Hitch
- Concealed Cross Tube
- 750 lbs Vert Load
- EcoHitch
more information >

