How Can I Improve Ground Clearance and Reduce Rear Sag When Towing With a 2022 Nissan Pathfinder?
Published 11/20/2026 >
Products Featured in This Question
Question:
I purchased a trailer hitch for my 2022 Nissan pathfinder SL and finally got to put it on my suv because of health issues with cancer. My problem is the hitch hangs so low that I have trouble getting out of my drive way without it hitting the bottom of the hitch. I’m pulling a Aliner 12’ Scout with a very light tongue weight, sag is approximately 2-3 inches. I’ve had several welders look at the hitch for solving this problem they have all said that there is alternative ways to raise the receiver at a cost. I highly recommend changing the design on this particular hitch. It looks like I’m going to remove this hitch and have a custom hitch made it it’s place. I don’t feel safe with this and see it as a safety concern for towing I suggest you remove it from your inventory. I am retired and the wife and I just enjoy local camping here in San Diego. I have and will continue to use etrailer as my go to supplier for parts and accessories. Thank you for your time.
asked by: John H
Expert Reply:
Hello John,
First off, I am very sorry to hear about your health issues. I'm sure that was a scary time for you and your family. I'm glad you're now well enough to get the hitch installed and are still getting out there traveling with your wife. It really is the little things in life that mean the most. =)
I also understand your concern about the hitch scraping the ground, especially when you're towing. I definitely don't want you driving with a setup you don't feel safe using, so I'd like to troubleshoot a few things before you spend money having a custom hitch made.
I checked our installation video for the etrailer Trailer Hitch # e36ZV, and Brad mentions that you have 16" from the ground to the top inside of the receiver. That's actually a decent amount of clearance. Some vehicles only have around 12", believe it or not.
My biggest question is, does your hitch scrape the ground when you're not towing, or only when your Aliner is hooked up? That will help me figure out whether we can improve the clearance by addressing the rear sag.
Are you currently using anything to help support the rear of your Pathfinder when towing? A weight distribution hitch, like # WS38MV, is designed to redistribute some of the trailer's tongue weight across the tow vehicle and trailer axles, which can help reduce rear-end sag when properly matched to the setup. There may also be suspension enhancement options worth looking into.
One last question: Do you know the loaded tongue weight of your Aliner? That's important because we need to match any weight distribution system to your actual tongue weight and confirm it's appropriate for your vehicle and trailer.
I'd really like to help you find a solution before you spend money having a custom hitch made. I want you and your wife to be able to enjoy those camping trips without worrying about scraping every time you pull out of the driveway.
Product Page this Question was Asked From
Weigh Safe True Tow Weight Distribution Hitch - 2" Shank - 4" Drop - 8.5K GTW
- Weight Distribution Hitch
- WD With Sway Control
- Trunnion Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- 2-5/16 Inch Ball
- Fits 2 Inch Hitch
- Requires Disconnection
- 700 lbs
- Weigh Safe
more information >


