bing tracking image
Q & A Icon

Eaz Lift ReCurve R6 Weight Distribution Hitch for a Camper With a 2-Inch Coupler  

Published 11/16/2026

Question:

I have a small travel trailer with a 2" coupler and around 450 lbs of loaded tongue weight. I'm looking for a weight distribution hitch with sway control, but I don't want to deal with a separate friction sway bar every time I back into a campsite. Would the Eaz Lift ReCurve R6 work for this setup, and does it come with the correct hitch ball?

0

Expert Reply:

Hey Justin! Yes, the Eaz Lift ReCurve R6 Weight Distribution Hitch # CAM25TC will work for your travel trailer. This version comes with a 2" hitch ball and 600 lb spring bars, making it a good match for your 450 lb loaded tongue weight.

The ReCurve R6 has built-in adaptive sway control, so you won't need a separate friction sway bar. It automatically reduces sway resistance during tight turns, and you can back into your campsite without disconnecting the spring bars. The system also uses top-loading spring bars for better ground clearance and includes the hardware needed for a standard compatible trailer-frame installation.

What kind of travel trailer are you towing?

expert reply by:
0
Robin H
CAM25TC
CAM25TC
(click to enlarge)
Justin profile picture

Justin

11/16/2026

It's a small Jayco Jay Flight travel trailer. One thing I forgot to ask, do I need to remove the spring bars when backing into a tight campsite?

Robin H. profile picture
Etrailer Expert

Robin H.

11/16/2026

@Justin no, you can leave the spring bars connected when backing into your campsite. The ReCurve R6 automatically reduces sway-control resistance during tight turns, so there's no need to disconnect anything for normal backing and maneuvering.

Product Page this Question was Asked From