BTBRV Magnetic Hitch Receiver Reducer Sleeve Dimensions  

Question:

Expert Reply:

Thanks for letting us help Matt. The BTBRV Magnetic Hitch Receiver Reducer Sleeve # BTBRV64FR measures 4-3/4" from the back of the collar to the end of the sleeve. Within that length, the hitch pin slot starts 1-3/8" from the back of the collar and extends to 3-3/8". I've included a dimensional graphic below showing exactly where these measurements are taken. Unfortunately, based on those dimensions and the hitch pin location you provided, it doesn't look like the # BTBRV64FR will line up properly with your receiver.

A better option would be the Replacement 2-1/2" to 2" Adapter Sleeve for TorkLift SuperHitch Magnum # TLM9006. The center of the hitch pin hole on this adapter measures 3-1/2" from the edge of the sleeve, which sounds like a much closer match for your application. I've also included a dimensional graphic of the # TLM9006 so you can compare the measurements directly with your existing receiver.

What are you planning to tow that requires the reducer sleeve?

expert reply by: Christopher H

0

BTBRV Magnetic Hitch Receiver Reducer Dimensions
(click to enlarge)

2-1/2" to 2" Adapter Sleeve for TorkLift SuperHitch Magnum Trailer Hitches Dimensions
(click to enlarge)

Matt

10/26/2026

That's the info I needed! Thank you!

Christopher H.

10/27/2026

@Matt No problem at all! Let us know if you need anything else.

Barryd

10/28/2026

The reducer is well constructed, easily installed and has a nice appearance. It does not rattle.

Christopher H.

10/28/2026

@Barryd Thanks for sharing! What do you typically tow with the reducer in place?

Barryd

10/28/2026

I don't tow with the reducer in place as I use the 3 inch drawbar when pulling a large boat. The reducer holds a two inch tow hook when the vehicle is not used for towing.

Christopher H.

10/28/2026

@Barryd Thanks for taking few minutes to leave your feedback. We appreciate it.