What Fittings Are On The Ends Of The B&B Molders Coil Hose BM77JR?

Updated 08/25/2026 | Published 08/18/2026

Question:

I have a Brinkley G3970 and have this as the factory provided exterior faucet. My previous hose cracked and I put a connector in as a temporary fix. What is the plug-in connector size so I can look at a local hardware store to find it?

asked by: Kyle C

Expert Reply:

Hi Kyle!

The B&B Molders Coil Hose with Quick Disconnect - 15' - Black # BM77JR has a 1/4" industrial-type male quick-connect on one end and a standard male garden hose thread (MGHT) on the other end. That quick-connect fitting might be a little hard to find, so I would call ahead to make sure they have it before just heading over. The MGHT should be available pretty much anywhere.

What are you typically using that exterior faucet for?

expert reply by: Lazer S

Kyle C.

8/25/2026

We use it to wash the dog or our feet off, also wash the rv.

Lazer S.

8/25/2026

@KyleC Makes sense. Definitely something you want working! ^___^ Let me know if there is anything else I can help with!

Kyle C.

8/25/2026

@LazerS So there’s no fitting number that you guys have or a part from a supplier you can direct me to for the quick connect?

Lazer S.

8/25/2026

@KyleC Unfortunately not. You could try B&B Molders directly, but they don't really do replacement parts like this. Typically they would say to just replace the whole thing.