Where To Hoop Up Brake Controller Power Wire On A 2025 Ford Maverick Hybrid
Updated 07/21/2026 | Published 07/16/2026
Question:
Where do I hook up the power wire on a 2025 maverick hybrid? I would assume there’s somewhere in the engine compartment and not have to chase back to the battery under the rear seat.
asked by: Paul G
(click to enlarge)
Expert Reply:
Hey Paul, thanks for reaching out. On the 2025 Maverick Hybrid, the 12-volt battery is located under the rear passenger-side seat, so there isn't an under-hood battery like you'd find on most trucks. Ford does provide under-hood jump-start terminals for charging and emergency starting. Those posts are intended for jump-starting and service access, not as a dedicated power source for accessories like a brake controller.
For an aftermarket brake controller, I'd still recommend running the power wire directly to the 12-volt battery under the rear seat with the appropriate circuit breaker or fuse installed near the battery. That follows the brake controller manufacturer's installation instructions and ensures the controller has a reliable power source. While it may be tempting to use the under-hood jump post to avoid running a wire to the battery, I wouldn't recommend it for a brake controller installation.
What brake controller are you using?
