Replacement For A 3,500 Pound Atwood Electric A-Frame Jack  

Question:

Expert Reply:

Hi Stanley!

Atwood has been gone for quite some time now (roughly 10 years) and their replacement parts are going to be extremely hard to find, unfortunately. We do not any of their parts left, but you may be able to find a few at local trailer supply places or second hand websites.

If I were in this position, I would just replace the jack. If you can tell me the capacity and lift your current jack has, I can definitely see what we have available to match it.

What kind of trailer do you have as well?

expert reply by: Lazer S

0

Stan M.

5/14/2026

Atwood power jack-3,500lb. #80530 or At80718

Lazer S.

5/14/2026

@StanM We actually used to carry both of those back in the day. I think the part I have below would be a very goof replacement for either one of the Atwood jacks you listed: etrailer Electric Trailer Jack - Drop Leg - A-Frame - 22-1/2" Lift - 3,500 lbs # e79GV It has the same capacity, a similar height, similar lift, and will bolt into the same place your current jack is (the vast majority of jacks use the 3-bolt pattern as a standard). It will also need to be wired to a battery or power source to function. This is the one I would use as a replacement. I did include a link to all the jacks we carry that would come close to the Atwoods as well.

Helpful Links

dept-pg-trailer_jack-pt-a~frame_jacks-sz-bolt~on-gw-3001_~_4000_lbs-pc-electric_jack.aspx