How to Pair the Bluetooth on the 30 Amp Go Power PWM Solar Charge Controller w/ Bluetooth 34276119  

Question:

Expert Reply:

Hey Kenneth, congrats on your new trailer. I linked the installation instructions below for the Go Power PWM Solar Charge Controller with Bluetooth item # 34276119. It's got a section on page 21 that shows how to pair your phone's Bluetooth through the app. I've also copied and pasted the instructions.


Open the app, and the Main page will prompt you to select devices. Selecting the device should cause a connection to be automatically established. The Bluetooth® symbol on the charge controller’s display will become solid and the monitor page of the Go Power! Connect App will be started. For step-by-step instructions, please visit our YouTube channel at www.youtube. com/c/GoPowerSolar and head to the PWM-30-UL Solar Controller video playlist. If you have an older PWM-30-UL model (pre-2022) and it does not connect, press and hold the A and B buttons of the charge controller simultaneously for 3 seconds until the Bluetooth® symbol on the charge controller’s display starts flashing. Once this pairing process has been initiated on the charge controller, select the charge controller in the Device Selection main page of the Go Power! Connect app. For these older devices, selection from the app must be performed while the Bluetooth® symbol is still flashing on the charge controller’s display. The flashing state will last for 60 seconds. If the charge controller is not selected on the Go Power! Connect app within this time, the pairing process is canceled, and the A and B buttons must be long pressed again.

expert reply by: Jerred H

0