Will The Draw-Tite Max-Frame Trailer Hitch 76226 Fit A 2021 BMW X3 xDrive30e?

Updated 02/13/2026 | Published 02/09/2026

Question:

I have a BMW X3 model xDrive30e. Will the Drawtite model 76226 fit my vehicle. If not, which do fit?

asked by: Robert L

Expert Reply:

Hello Robert, thanks for reaching out. Yes, the Draw-Tite Max-Frame Trailer Hitch # 76226 will indeed fit your 2021 BMW X3 xDrive30e. I double checked with Draw-Tite and they confirm it to work with the xDrive30e model, so it'll install without issue.

What will you be using the hitch for? Towing a trailer?

expert reply by: Jesse M

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
(click to enlarge)

Xavier

2/13/2026

I purchased and installed this exact one for my 2021 X3 3.0 sdrive

Jesse M.

2/13/2026

@Xavier Nice! Glad to hear the hitch is working out. Thanks for sharing!

Davidk

2/13/2026

It fits perfectly. I've been using mine for about 18 months, with great results. Please note: installation instructions for the hitch state that there is a screw under each of the red reflectors on the bumper cover. This is NOT the case for my '24 X3 M40i. If yours is a late model, be careful. I snapped both reflectors trying to get them out with a trim removal tool, only to discover no screw. That said, the hitch is ideal.

Jesse M.

2/13/2026

@Davidk Hey David, appreciate the feedback! Thanks for sharing that tip about the screw (or lack thereof) under the red reflectors. I am sure that'll help others with similar setups.

Robert T.

2/13/2026

I installed the same Draw-Tite Hitch on my 2022 BMW X3 last year, it fits perfectly. One important feature is the Draw-Tite accommodates the existing exhaust box hangers without any alteration. The Curt Hitch requires a very difficult modification to the exhaust box hangers. The overall installation followed the eTrailer video which was excellent, better than the written instructions. taking the rear bumper cover off and on is a challenge and requires careful patience. The only small criticism on the Draw-Tite, it would be better with "smoother" welds and better powder coat. I applied an extra coat of Rustoleum paint.

Jesse M.

2/13/2026

@RobertT Hey Robert, thanks for sharing! That's a great call on the exhaust box hangers, and its good to know the Dra-Tite hitch goes on without the need for modification. I'm sure this will help others looking at similar setups. Definitely a good call with the Rustoleum too. I recommend exactly that all the time to folks who want to touch up their hitches. Also glad to hear you liked our video! Thanks for the feedback!