Replacement Step Fender for a 1998 Shorelandr Single Axle Trailer
Updated 10/01/2025 | Published 09/30/2025
Question:
Hello, maybe you can help me. Im trying to find a pair of boat trailer fenders to match the existing fender brackets on my trailer. It only came with one fender, so Id like to get a matching pair, and preferably not cut the brackets off. Its a 1998 Shorelandr single axle trailer. About 27 between forward and rear mounts. Mount holes are 4.5 center to center. Current fender is a plastic step fender, about 12 1/8 tall overall 9.75 tall behind the tire to the top of the step about 39.5 long step to step and about 9 deep. Mainly looking for that 27 measurement between the front and rear brackets so I dont need to relocate them. Metal or plastic is fine at this point. Could you help me out? Thanks!
asked by: Dave
Expert Reply:
Hey Dave, welcome back!
The Fulton Single Axle Trailer Fender with Top and Side Steps # F008583 is the closest fender to what you're needing. The mounting bracket openings start at 28", but everything else matches up REALLY close, so I recommend going with this and then making any adjustments that you might need to make from there.
I'm attaching a dimensional photo from the product page for you to compare to what you already have.
What do you think?
