Is Loctite Needed For U-Bolts for Reese or Pro-Series Weight Distribution Spring Bar Lift Chains RP5
Updated 10/22/2025 | Published 03/24/2025
Question:
Is locktite needed on these threads when buying a new set of u bolts/washers/lock nuts?
asked by: Chris T
0
RP58032 U-Bolts
(click to enlarge)
(click to enlarge)
Expert Reply:
Hello Chris, thanks for reaching out. Yeah you can use loctite on the Replacement U-Bolts for Reese or Pro-Series Weight Distribution Spring Bar Lift Chains # RP58032. It is not required, but there is really no reason why you couldn't if you want to. Might make it harder to remove and replace if you ever need to, but you could probably still break it loose if you absolutely had to. The u-bolts really should not have to come off.
expert reply by:
Jesse M
0
Continue Researching
- Shop: Replacement U-Bolt Kit for Blue Ox Weight Distribution Spring Bars
- Q&A: Replacement Spring Bar U-Bolts for Reese Weight Distribution System
- Q&A: Will The Reese U-Bolt RP58032 Work With A Husky Spring Bar?
- Q&A: What are the Dimensions of the U-Bolts for Replacement U-Bolts RP58032
- Q&A: Availability of Reese Weight Distribution U-Bolt Pair with Washers and Nuts
- Q&A: Replacement U-Bolts for Reese Weight Distribution System Spring Bar
Jesse M.
10/22/2025
Hey Chris, how did things go using the Loctite on your replacement U-bolts? Did it hold up well without making removal too tough later on? Your update could make it easier for the next person with the same setup.