Wiring Diagram for a 4-Way Connector On a 2004 Jeep Wrangler
Updated 12/29/2009 | Published 12/28/2009
Question:
I need a wiring diagram for a 2004 jeep wrangler i have the harnes i need the schematic for it
asked by: Chad D
Expert Reply:
Wiring your 2004 Jeep Wrangler will require installing a trailer wiring harness inline with existing vehicle tail light connectors. The Plug-N-Tow (TM) Vehicle Wiring Harness, item #32615, installs underneath the passengers side of the vehicle above the rear tire mud flap. Once you have found the mating connector you just separate it being careful not to break the locking tabs and then plug the harness inline.
At this time we do not have a schematic for the wiring harness. You can view our wiring page (see link) for information on the functions of the 4-Way connector. Basically the White wire is attached to a suitable vehicle ground and once connected the yellow wire provides left turn/brake signals, the green wire provides right turn/brake signals and the brown wire provides the tail light function on the 4-Way connector.
