Can 2020 Ford Expedition be Flat Towed with Blue Ox Base Plate
Updated 11/03/2025 | Published 01/08/2025 >
Products Featured in This Question
Question:
Hello, We have a 2020 Ford Expedition Stealth Edition that I want to tow using a blue ox system. Can you tell me which adaptor setup I need for that Stealth edition expedition? It is the Max version if that makes a difference. Thank you.
asked by: Stephen K
Expert Reply:
Hey Stephen, as long as your 2020 Ford Expedition Stealth Edition has 4WD with a 4 low mode we have the Blue Ox base plate kit part # BO84FR that is a confirmed fit. I did some research and it looks like the Stealth models can have this option but not always so you'll need to check and be sure.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. One of the most popular compatible tow bars is the Blue Ox Avail # BX7420 which comes with safety cables. The coiled design helps keep the cables off of the ground.
For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.
And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.
Continue Researching
- Q&A: Recommended Parts Needed to Flat Tow a 2018 Jeep Wrangler JL or JL Unlimited
- Q&A: Why Aren't The Torque Specs For The BX2908 Listed In The Installation Manual
- Q&A: Rock Guard That Works With Blue Ox Tow Bar
Jameson C.
11/3/2025
Hey Stephen, did you get a chance to check if your Expedition has the 4WD with 4 low mode for that Blue Ox base plate fit? It’d be great to hear if the setup came together smoothly. Your update could make it easier for others towing the Stealth Edition.