Recommended Brake Controller for a 2013 Chevrolet Tahoe

Question

Question:

I want to get a brake control for me 2013 Chevy Tahoe. I am getting some confusing info. I had a tekonsha prodigy for a dodge ram. I like the simplicity. Is amperage a factor? The Tahoe came with tow package.

asked by: Daniel P

0

Expert Reply:

Daniel, firstly I'd recommend sticking with Tekonsha and using the Prodigy P3 # 90195. Secondly, what do you mean is amperage a factor? This brake controller is a proportional controller which means that your trailer brakes will mimic your tow vehicle's brakes. So, if you slam on the brakes in your vehicle, your trailer brakes will activate with the same intensity; if you brake lightly, your trailer brakes lightly too.

This brake controller will also work with up to 8 braking assemblies, is compatible with electric and EOH brakes, and has an auto leveling feature which lets you mount it at any angle for an easy install.

expert reply by: Bryce D

0

Daniel P.

9/25/2024

I get different prices when I enter the P3, for e-trailer? The amperage was a selection when filter and I was browsing

Bryce D.

9/25/2024

@DanielP The different pricing could depend on if you're looking at one with a custom wiring harness or not - but the amperage thing, I'm not sure at all what you're looking at. I'm not seeing any facets that let you filter by amperage, but in any case, you don't need to worry about it.

Daniel P.

9/25/2024

@BryceD 2 Can you send a link for the P3 for 2013 Chevy Tahoe. 5.3 with tow package

Daniel P.

9/25/2024

And thanks for your help

See All (5) Replies to Daniel P. ∨

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 6

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 7

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 8

Hey Brandon, I would strongly recommend sticking with the Tekonsha RF brake controller part #TK94FR. We know this works really well and it sounds like it worked well for you too. The Curt Echo is not reliable enough for me to really ever recommend it…

view full answer...

Answer 9

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

We can get you everything you need for towing with your 2017 Toyota Sienna XLE. By plastic shield, I believe you are referring to the appearance panel underneath the Sienna, and that will have to trimmed a bit in each of the hitches available for the…

view full answer...

Answer 12

Hey Andrew. The Redarc Tow-Pro link will indeed work just fine for your 2026 Toyota BZ, and due to it not needing a brake output wire you do not need to hook up the brake out put wire at all. You'll plug the USCAR pig tail #20147 into the Tow-Pro…

view full answer...

Recommended Brake Controller for a 2013 Chevrolet Tahoe

Featured Help Information

Miscellaneous Media

Continue Researching