Availability Of Trailer Hitch For 2024 Chevy Equinox EV

Question

Question:

Does your Chevy Blazer EV fit my new Chevy Equinox EV since the base of the cars are so alike, If not when will you have a 2inch hitch for the Equinox EV? Thanks Tim H 2024 Chevrolet Equinox EV LT2 FWD

asked by: Timothy H

0

Expert Reply:

Hello Timothy. The hitch from a Chevy Blazer EV will not fit the Equinox EV. We do offer a trailer hitch for the 2024 Chevy Equinox (non EV), the etrailer class 3 hitch # e59ZR, but this will not fit the EV model. I reached out to the manufacturer and their techs said that they do not have specific hitch for the EV model yet but they hope to have one in the works soon.

expert reply by: Jesse M

0

Answer 1

Hey Jim, thanks for reaching out! Curt just came out with the Hitch Receiver #C89RV for your 2024 Chevy Equinox EV so you'll be able to utilize it with the T-Connector #C44FR wiring kit!

view full answer...

Answer 2

Hey Brent, That's a really good question, and while there is some trimming needed on your 2024 Chevy Equinox EV, bumper/fascia trimming is not required when installing the Curt Trailer Hitch Receiver #C89RV. What you'll have to trim is some…

view full answer...

Answer 3

Hi Michael, Yes, it sure does; you were correct, as not only does the Curt Trailer Hitch Receiver #C89RV fit your 2024 Chevy Equinox EV, but so does the Draw-Tite Trailer Hitch Receiver #DT66KV.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hello Mike, thanks for reaching out. We do offer a few different hitches for the 2026 Subaru Crosstrek, the Curt #C22MJ, the Draw-Tite #76209 and the EcoHitch #EH57CR. All 3 of these hitches place the receiver in virtually the same position beneath…

view full answer...

Answer 12

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Availability Of Trailer Hitch For 2024 Chevy Equinox EV

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching