Do the Camco RV Refrigerator Vent Cover Base CAM42161 and Top CAM42160 Fit Each Other?

Question

Question:

Does the camco 42161 and 42160 refrig base and cover fit each other

asked by: Duwane W

0

Expert Reply:

Yes, they do! The Camco RV Refrigerator Vent Cover - Base item # CAM42161 and the Camco RV Refrigerator Vent Cover - Top item # CAM42160 do indeed fit each.

expert reply by: Jerred H

0

Answer 1

I am sure we do but I do not have any way of knowing what size cutout your Fleetwood Southwind RV has so you'll need to take a measurement. The Dometic RV Refrigerator Roof Vent Cap and Base item #DMC97FR, you were looking at, is designed to fit…

view full answer...

Answer 2

The RV Refrigerator Roof Vent Cap and Base item #DMC37FR needs to be mounted to the roof from the outside.

view full answer...

Answer 3

The RV Refrigerator Roof Vent Cap and Base #DMC37FR will fit with your Dometic refrigerator DM2652. You will want to verify the cutout size on the roof if this is not the original refrigerator for your camper. This vent is designed for a 23-3/8"…

view full answer...

Answer 4

The RV Refrigerator Roof Vent Cap and Base #DMC37FR comes with the vent cap and the base. Installation hardware is not included. We do have installation hardware available. The Camco RV Vent Installation Kit #CAM25013 if you have a rubber roof or the…

view full answer...

Answer 5

Hey Genny, the membrane that comes with the LaSalle Bristol RV Roof Replacement Kit w/ XTRM Membrane #344270KIT21 comes in a big roll. The thickness of the membrane is 27 MIL which makes it about .68 inch thick. Do you have any other questions? I…

view full answer...

Answer 6

Hi Leslie, We may have an option for you, but we don't have a base for the Ventmate cover, so you'd have to replace the base and and cover together. What you can likely use is a universal option from Camco, which will give you both the base…

view full answer...

Answer 7

If your cargo trailer has a roof membrane like the one shown in the video you referenced, then yes; you will want to use the LaSalle Bristol RV Roof Replacement Kit w/ XTRM Membrane - 21' Long #344270KIT21. The video is a great example of how…

view full answer...

Answer 8

Hey Kent, That original power converter, although unnamed, is a Parallax or MagneTek brand converter. They are different companies but essentially the same part, or identical parts. With that said we do have a Progressive Dynamics Power Converter,…

view full answer...

Answer 9

Hey Rob, the big differences between the two transfer switch is that the Go Power part #34270278 is made in the USA and has a metal case whereas the Furrion part #F50ATS is not made in the US and has a plastic case. This is why it costs less.…

view full answer...

Answer 10

I have good news, our trailer jack that has a 2 inch outer diameter part #DL74MR would fit and work well. While it has a 1,000 lb weight capacity that does not mean 1,000 lb total trailer weight capacity. That capacity is the tongue weight capacity…

view full answer...

Answer 11

We don't carry the Suburban line of water heaters so you will need to check a few measurements to make sure it will fit, but you may need to do a few modifications to make it fit properly. With that said, here are a few specs for you. The Fogatti…

view full answer...

Do the Camco RV Refrigerator Vent Cover Base CAM42161 and Top CAM42160 Fit Each Other?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching