Procedure to Remove Plastic From Footrest On Thomas Payne Reclining Furniture
Updated 04/30/2024 | Published 04/27/2024
Question:
Got a Thomas Payne recliner, how do I remove the heavy plastic that covers the bottom leg rest. Its sewed into the seam.
asked by: Dale K
Expert Reply:
Here is the procedure to remove the plastic from any Lippert reclining furniture.
1. Pull on handle to release footrest.
2. Use hair dryer to heat top seam of plastic.
3. As plastic is warmed, tug away covering along the perforation.
Note: If the plastic starts to tear while pulling the plastic at the top of the footrest, try removing the plasticvfrom the opposite end.
4. Once the top of the plastic is removed, grasp the plastic from the top and pull down, making sure the protective covering remains straight and tight.
5. Continue to pull tightly while using scissors to cut plastic from the back of footrest.
6. Use needle-nose pliers to remove any small pieces of plastic on the back of the footrest that cannot be removed by hand.
7. Push on footrest to close the chair.
