Will Biker Bar Fit Suzuki Boulevard M109R

Updated 04/25/2024 | Published 04/24/2024

Question:

Hi Do thé biker bar work with a Suzuki Boulevard m109r ?

asked by: Sylvain H

Expert Reply:

B&W hasn't had a chance to test the Suzuki Boulevard M109R but it may fit the # BWMC2304. To find out if it will fit you will have to take some measurements. A two piece motorcycle tube frame is needed for the Biker Bar to clamp onto. The diameter of each frame tube must be at least 1.125" and no more than 1.5".

Check that there is nothing hanging down below the tube frame, such as a motor, transmission or exhaust. With the rider sitting on the motorcycle, the distance from the side of the frame tubes to the ground must measure between 5" and 6.5".

The distance form the outside edges of each frame tube must be no less than 10" and not more than 14.5". Take this measurement where the Biker Bar will be attached. There must be 1/2" of clearance between the motor, transmission, and primary drive to allow clearance for the Biker Bar clamps.

expert reply by: Robin H