Availability of Ball Mount With 3" Rise/Drop

Updated 02/27/2024 | Published 02/24/2024

Products Featured in This Question

Draw-Tite Ball Mount for 2" Hitches - 3" Rise, 4" Drop - 9-1/4" Long - 16K

(3454)

$57.42

2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs

(2617)

$21.43

2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000

(3858)

$18.15

Hitch Ball for Curt Pintle Hook Combo - 1-7/8" Diameter - 6,000 lbs - Chrome

(53)

$27.49

TowSmart Towing Starter Kit for 2" Hitches - 2" Ball - 2" Rise, 3-1/4" Drop - 5K

(43)

$46.78

Question:

Using the standard ball measurement method, I find that I need a 3 inch . Not sure there is a 3 inch ball mount available? Is it better to round up to 4 inches or down to 2? Nose slightly low or slight high from level? Thanks.

asked by: Daniel

Expert Reply:

I'm not sure if you're looking for a 3" rise or drop but we have options for both so you don't need to worry about being off by an inch. For a ball mount with a 3" rise you can use the # 40331. You will also need # C48810 for a 1-7/8", # A-90 for a 2", or # 19286 for a 2-5/16" hitch ball. If you need a drop you can use the # TS64FR. This has a 3-1/4" drop but the 1/4" difference won't be noticeable.

expert reply by: Robin H