How Does the Flush Mount Grommet # A91GB Install a # AL91AB Light Into a Trailer
Updated 04/07/2014 | Published 04/04/2014
Products Featured in This Question
Question:
Hi I have purshased AL82AB light, and A91GB grommet but now am confused as to how to mount them..? Its not clear how the grommet mounts and how the light is retained in the grommet or on the trailer. what am I missing? all the best,
asked by: Robin
Expert Reply:
All the parts you ordered are designed to work together, but the grommet part # A91GB is for flush mounting the Optronics Light part # AL82AB that you have. This grommet will get installed into a hole in on your trailer that is about 2-7/8 inches across and 1-1/2 inches tall.
If you do not have a hole with those dimension you might be better served getting a Black Mounting Bracket # A91BOB to allow you to surface mount the # AL82AB.
Continue Researching
- Q&A: Torque Spec For Leaf Spring Shackle Bolts
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Search Results: trailer lights
- Search Results: side lights
- Search Results: wesbar side marker light
- Q&A: How Tight Should Shackle Bolts Be Tightened On Trailer
- Shop: Thinline LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 11 Diodes - Red Lens
- Shop: Clearance or Side Marker Trailer Light w/ Reflex Reflector - Rectangle - Amber Lens
- Shop: ThinLine Mini LED Side Marker or Clearance Light w/ Bracket - Submersible - 3 DIodes - Amber Lens
- Shop: Mounting Bracket for Optronics A91, AL82, AL90, AL91, or AL191 Series Lights - Open Back - Black
- Shop: Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber
- Shop: LED Clearance or Side Marker Trailer Light w/ Reflector - 1 Diode - Black Base - Amber Lens
- Search Results: wiring harness
- Q&A: Torque Spec for 9/16" x 3" Long Bolt for Suspension
- Q&A: Proper Torque for Trailer Suspension Wet Bolts
- Q&A: Torque Rating Requirements for Installing Leaf Springs on a 7000 lb Tandem Axle Trailer