How do You Level the Tekonsha Voyager Braker Controller

Updated 03/21/2014 | Published 03/20/2014

Question:

I have a Voyager, how do I level it?

asked by: Colton W

Expert Reply:

Here are the steps for leveling your Tekonsha Voyager Brake Controller part # 39510:

1.Connect trailer to tow vehicle, Bi-Colored
Light should glow GREEN.
2.Set power knob to maximum by fully
rotating clockwise.
3.Depress tow vehicle’s brake pedal and hold.
4.Rotate the Level Knob counter-clockwise
(towards the back of the control) until the
Bi-Colored Light starts to change colors
from GREEN to RED.
5.Carefully rotate the Level Knob clockwise
(towards the front of the control) until a
shade of ORANGE is visible.
Bi-Colored Light should show:
• DIM ORANGE for a typical setting.
• BRIGHT ORANGE for an aggressive setting.
• DIM RED for a more aggressive setting

I attached installation instructions, an install video and a review video for this product for you to check out also.