Trailer Hitch For A 2023 Subaru Crosstrek Non Hybrid

Published 11/05/2022

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(812)

$194.94

2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs

(3914)

$10.68

Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs

(2282)

$41.29

Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span

(2948)

$3.42

Question:

Hi, I have a 2023 Subaru Crosstrek not Hybred. Will the Curt C13382 fit my car? I see your expert said the Curt class II would. I like the Curt a little better than the Draw-Tite although it is nice that the Draw-Tite Class II fits without enlarging the mounting holes for the mounting.

asked by: Daniel D

Expert Reply:

Even though The Curt Trailer Hitch Receiver # C13382 is not confirmed to fit your 2023 Subaru Crosstrek Non Hybrid we do have another option for you. The Draw-Tite Trailer Hitch Receiver # 36644 is confirmed to fit. No drilling is required for installing the Draw-Tite hitch onto your vehicle, so you will not have to enlarge the mounting holes.

The Draw-Tite hitch has a maximum gross trailer weight up to 3,500 pounds and has a maximum tongue weight up to 350 pounds. I would recommend checking your vehicle's manual to find the proper towing capacity of your vehicle. If you're wanting to tow a small trailer you will also need to install The T-One Vehicle Wiring Harness # 118467. This harness will give you a 4-flat connector and will plug into your vehicle's wiring harness, which is located in the rear cargo area, either behind the driver's-side trim panel or in the spare tire compartment.

The Curt Class II Drawbar # C45016 The 2 inch hitch ball # C40018 and Pin & Clip # F-4 are needed to finish up your towing journey. I attached a few installation video links below of the hitch and wiring being installed onto a older Subaru Crosstrek but the installation process will be the same for your 2023 Subaru Crosstrek.

expert reply by: Noah E