How to Wire the Jensen JWM62 Stereo When Switching From a Jensen AWM910

Updated 10/03/2022 | Published 10/01/2022

Question:

On the wiring from AWM910 to JWM62 the 910 has fuses with the wiring but the JWM62 doesnt have fuses do you cut the fuses out???

asked by: Sherry N

Expert Reply:

I contacted the manufacturer about the installation process when going from the AWM910 to the Jensen RV Stereo # JWM60A (JWM62).

You will need to cut the wires past the fuse, as the new radio is fused at the port. You will then go wire for wire from the old harness to the new, capping off the yellow wire that is not used on the new harness.

expert reply by: Scott S