Installation of Second Curt Friction Sway Control With Adapter

Updated 07/28/2022 | Published 07/26/2022

Products Featured in This Question

Replacement Weight Distribution Bolt-Together Round Bar Head

(50)

$235.05

Curt Friction Sway Control for Weight Distribution Systems

(323)

$76.84

Replacement Ball for Curt Friction Sway Control System

(44)

$13.44

Weld-On Sway Control Tab

(37)

$13.44

Reese Sway-Control Bracket for 2" Ball Mounts - Class III and IV

(319)

$44.40

Question:

I have one Curt friction sway bar attached with an adaptor plate, but how do I attach another on the opposite side?

asked by: Robert B

Expert Reply:

If you have a weight distribution system with a head like the # PS58442 you were looking at the only thing you need to do is attach the # 17200 to the other side of the frame and insert the # C36BR in the hole on the other side.

It sounds like the adapter you're referring to may be something like the # RP26003. Unfortunately, there is not a bolt on solution that will allow you to install 2 of the # 17200. The only option would be to use the Weld-On Sway Control Tab # C45822 and put one on each side of your ball mount.