5th Wheel Trailer Hitch and Installation Kit for a 2007 Toyota Tundra Crewmax 4x4 TRD
Updated 10/29/2013 | Published 10/27/2013
Products Featured in This Question
Question:
toyota crewmax 4x4 TRD 2007 5th wheel hitch WIll this system work on my truck as listed above?? and what do i need for a complete setup??
asked by: Roxanne
Expert Reply:
Fifth wheel trailer hitch installation kit # RP30035-309 will fit all bed lengths of the 2007 Toyota Tundra.
I recommend a step up using # RP30047. This is a 16K hitch with a double jaw instead of a slide bar. You will have better contact with the king pin for less movement and noise.
If your truck has the 5-1/2 foot bed then you will have to use a Sidewinder in order to make tight turns and will require wedge kit # SWW-03. In order to determine if there is a Sidewinder that will fit you will need to get the pin box manufacturer and model number off of a sticker or plate on the trailer pin box. Then you can compare it to the chart at the bottom of the Sidewinder FAQ article I have linked to the right to determine if there is a fit.
To add trailer wiring to the truck bed you can use # HM43397 which fits trucks that came with the factory 7-Way trailer connector. This plugs in line the the factory harness and provides a 7-Way in the truck bed.
