4-Way Flat 24 Inch Extension Recommendation
Updated 04/25/2022 | Published 04/21/2022
Products Featured in This Question
Question:
need a flat 4 to flat 4 harness. found a 12 9153p and a 48 18044 harness. need a 24. Is there one?
asked by: Ronn V
0
Expert Reply:
For a 24" 4-Way Flat extension we have the Hopkins Endurance Easy-Pull # HM47004. I like this design because there is a big loop for the connector so it's easier to disconnect the 4-Way ends instead of chancing some damaged wiring.
If you'd rather use a standard 4-Way extension then you can use the part # 18044 you mentioned and just bundle some of it up with a zip tie, like what we find with the kit # DW05724-10, to take up the slack.
Attached is a review video for you to check out.
expert reply by:
Jon G
0
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Trailer Connector With 4-Way Male Connector On Both Ends
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Q&A: Screws Needed To Attach 5/8" Treated Plywood To Aluminum Snowmobile Trailer Frame
- Q&A: Where Are Loadstar Tires Made And What Will Cause Outer Tire Wear On One Tire On A Boat Trailer
- Q&A: How Far Apart Should the Leaf Spring Hangers Be Spaced With a 26 Inch Long Leaf Spring
- Q&A: Picking Between 27 inch and 25-1/8 inch Long Leaf Spring for Trailer
- Q&A: How to Route 4-Way Connector Underneath 2011 Toyota Highlander