Does TrailerLegs Tire Saver Stands for Trailers Require Leaf Spring Suspension

Question

Question:

Will these stands work for trailers that dont have leaf springs?

asked by: Van C

0

Expert Reply:

The TrailerLegs Tire Saver Stands for Trailers w/ Leaf Spring Suspensions # 326-TRLLG-4 were designed to be used with trailers that have leaf spring suspension. They can't be used with torsion axles suspension but if for some reason you had a straight axle with now suspension this could work.

expert reply by: Jameson C

0

Answer 1

The TSS-105-40 is no longer available from SuperSprings. You are going to need their current SumoSprings Trailer Helper Springs #TSS-106-40 for your Coachmen Apex Nano 193BHS. This kit is designed for underslung axles with a capacity between 3,000lbs…

view full answer...

Answer 2

The Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers part #K71-358-00 comes with bronze bushing that have an 11/16" outer diameter and 9/16" inner diameter. They will be used to replace the nylon bushings inside the old…

view full answer...

Answer 3

To protect the tires from flat spots and damage the best practice is to raise the tires off the ground during winter storage. I recommend TrailerLegs Tire Saver Stands for Trailers w/ Leaf Spring Suspensions part #326-TRLLG-2 for a single axle or…

view full answer...

Answer 4

Your 205/75-15 tires measure slightly over 27 inches in diameter and 8 inches wide, so you'll need tire covers that fit those sizes. I recommend the SnapRing TireSavers Tire Covers #ST7001WH (White) or #ST7001BK (Black) because they are easy to…

view full answer...

Answer 5

I recommend going with Adco Tyre Gard covers that fit dual axles because they have proven to be some of the best tire covers out there and the dual axle cover design looks much cleaner than individual covers. For your 235/55R16 tires I recommend the…

view full answer...

Answer 6

I recommend using Adco SFS AquaShed Cover #290-46002. It is designed for bumper pull trailers with up to a 12' box length. It does include zippered panels on the side and rear so that you can still access your trailer while the cover is in place.…

view full answer...

Answer 7

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 8

Whether you have 205/75-15 or 225/75-15 tires the outer diameter will be either just over 27 inches or just over 28 inches. In either case, I recommend the Covercraft SnapRing TireSavers Tire Covers - 27" to 29" Diameter - Black Vinyl - Qty…

view full answer...

Answer 9

I can certainly help you out with that. The ST205/75R15 tires you have should measure right at 27" in diameter so in this case the most affordable route would be Adco Tyre Gard RV Wheel Covers - Designer Series - 27" to 29" - Tan…

view full answer...

Answer 10

If I do the math a 225/75-15 tire is 28.28 inches tall. This can vary from one tire to the next of the same size though. SnapRing TireSavers tire covers #ST7001WH would be a great fit since they are designed for 27 to 29 inch tires. Your tires are…

view full answer...

Answer 11

When using jack stands like the 2-Ton Jack Stands part #PTW41021 I recommend using one under each of the springs where the axle sits. If the springs are above the axle place them under the axle where the springs are. I also recommend using two on…

view full answer...

Answer 12

The only option I have for you to store a torsion axle trailer with the wheels off the ground is by using jack stands, the Powerbuilt Unijack Bottle Jack part #ALL620471 would be a good option as they have built-in bottle jacks and offer up to…

view full answer...

Does TrailerLegs Tire Saver Stands for Trailers Require Leaf Spring Suspension

Continue Researching