Weight Distribution Setup Final Measurements Recommendation

Updated 06/12/2013 | Published 06/09/2013

Question:

I set up the weight distribution per the video and instructions and my rear ped 1inch and the front raised 5/8, is that normal? using a 12,000lbs Reese on a 90 F-250 for a 34foot trailer with 800 lbs tongue weight. Thanks

asked by: Brad V

Expert Reply:

Since they say to get the final measurements to settle evenly within about a 1/2 inch I would say you are pretty close but could stand to reduce the number of links between the hook and spring bar. I would try taking one more link out and see where that puts you.

I attached an FAQ article on weight distribution systems for you to check out also.

expert reply by: Jameson C