Will the Aries Switchback Headache Rack # AA1110109 Fit My 2021 Silverado 2500 and My 2018 3500?

Question

Question:

Id like to purchase two of these for the following trucks: 2021 Chevrolet Silverado K2500 2018 Chevrolet Silverado K3500 These two trucks are work trucks ... no frills. Will this rack fit these vehicles?

asked by: Irving J

0

Expert Reply:

As far as the fitment of the Aries Switchback Headache Rack # AA1110109, that part will not fit either your 2018 Chevy Silverado 3500 or your 2021 Chevy Silverado 2500. While we do carry a Switchback model that will work with your 2018 Chevy Silverado 3500, we also offer some great options for headache racks for your 2021 Chevy Silverado 2500.

For the Switchback Headache Rack that will fit your 2018 Chevy Silverado 3500 (both 6-1/2 and 8-foot beds), you will need the Aries Switchback Headache Rack - Black Powder Coated Aluminum # AA98VB. This is the same exact style as the # AA1110109. This rack will give you the rugged look you are looking for without losing functionality.

Unfortunately, Aries does not make a Switchback rack that will fit your 2021 Chevy Silverado 2500 (both 6-3/4 and 8-foot beds). However, I recommend the B&W Custom Headache Rack w/ LED Brake, Turn, Tail Lights # BWPUCP7543BA (black powder coated steel) or # BWPUCP7543WA (white powder coated steel). One of the great features of the B&W rack is that it comes with raised tabs at both ends act as load stops that you can use for lumber, ladders, or other cargo. They also have bolt holes on the sides to attach your cargo with straps like the Ratchet Tie Down Straps w/ Storage Bag - 12' Long x 1-1/4" Wide # ETBMB-05852. Another cool feature is that it comes with brake lights and turn signal functions that are pre-wired to install into your truck's wiring.

expert reply by: Bob C

0

Answer 1

Hello Gary. For your 2024 Chevy Silverado 2500 HD with short bed it is recommended to have a sliding hitch to ensure that you can get around those really tight turns without damaging the cab of your truck. For a Curt sliding hitch I would recommend…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 5

Hello Paul, thanks for reaching out. The inside dimension of the Curt Heavy-Duty Dual Ball Attachment for Weight Distribution Shanks #C29NR is 2". It will work with any standard weight distribution shank. I edited a picture to illustrate.

view full answer...

Answer 6

Hello Volker, thanks for reaching out. For your 2024 Chevy Silverado 2500 6.5' bed with steps in front and back of the bed you can use the following Torklift Camper Tie Downs: - Custom Fit Tie Down Kit #TL86NR Keep in mind that these will only…

view full answer...

Answer 7

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 8

With this truck bed configuration (6-3/4) on your 2024 Silverado 2500, you'll need a slider hitch so that you can make turns properly without the trailer making contact with your truck. I recommend the B&W Patriot #BWRVK3270 due to it's…

view full answer...

Answer 9

Hey Jay. It sounds like you are on the right track here because a sidewinder pin box will be your only option for pulling your 5th wheel since you have a short bed truck with the Rambox. That said, you are right that the Reese Sidewinder cannot be…

view full answer...

Answer 10

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 11

Yes, you do. Since your 2024 Chevrolet Silverado 2500 has the shorter 6-3/4' bed you will need to use a sliding 5th wheel hitch to avoid running into your rear bumper or smashing you back window when turning. I recommend the B&W Companion OEM…

view full answer...

Answer 12

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Will the Aries Switchback Headache Rack # AA1110109 Fit My 2021 Silverado 2500 and My 2018 3500?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching