Operation Steps for Starting the Furrion RV Wall Oven

Published 09/22/2021

Question:

How to I operate it. I can only get it to 78 degrees. Where is the pilot light ? How to light it ?

asked by: Marilyn C

Helpful Expert Reply:

Please review the below instructions from the attached Manual from the Furrion RV Wall Oven, # FSRD22LASS.

1. Before lighting, reset gas control knobs to the OFF position.
2. Check that the main inlet gas valve is OPEN.
3. Keep the oven door in the open position for the full ignition process to view the pilot and burner until lit.
4. Push and turn the gas control knob counterclockwise to position until pilot lights. (you will hear a small clicking noise.)
5. If ignition does not occur in 5 seconds, turn gas control knob off, wait 2 minutes and repeat the lighting procedure.
6. Once the pilot flame is lit, continue to hold the oven control knob in for 10-15 seconds, then release knob and verify pilot stays lit. Repeat the above steps if pilot goes out after releasing the knob. (Keep the oven door open for this process)
7. After the pilot flame is ignited and the control knob is released, then turn the control knob counter-clockwise to the required temperature setting.
8. Within 20 seconds of the pilot flame being lit the main burner flame will automatically ignite, confirm with a visual inspection before closing the oven door.

expert reply by: Michael R